
Genuine AirTAC adjustable mounting height stopper cylinder, order code TWG50X20SC from the TWG50 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
The AirTAC TWG50X20SC is the round rod stopper version of the TWG50 series with the S magnet built into the piston, giving a 50 mm bore, a 20 mm stroke (tolerance +1.0/0 mm) and position feedback in one code. The flange mounts with an adjustable height, so the round stop tip can be set to the exact line of the workpiece on the conveyor, and the double acting design uses air both to raise the stop and to retract it.
Supply air filtered to 40 um enters through the PT1/8 port at 0.15-1.0 MPa; proof pressure is 1.5 MPa (215 psi) and the working temperature spans -20 to +70 C. The cushion is a bumper, lubrication is not required, and the series follows JIS standards. With the magnet present, sensors on the body can signal whether the stopper is extended, allowing the machine to hold parts at the station until the next operation is ready.
| Order code | TWG50X20SC |
|---|---|
| Product | Adjustable mounting height Stopper Cylinder |
| Stroke | 20 mm |
| Stopper | Round rod |
| Magnet | Magnet |
| Action | Double acting |
|---|---|
| Mounting | Flange, adjustable mounting height |
| Bore | Ø50 mm |
| Strokes | 20, 25, 30 mm (+1.0/0) |
| Port | PT1/8 |
| Stopper types | Round rod, Flat rod, Roller, Lever roller, adjustable oil cushion |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15-1.0 MPa |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to +70 °C |
| Cushion | Bumper |
| Lubrication | Not required |
Source: AirTAC Products Catalog 2026A (PDF01-P0756..P0757), TWG series specifications and ordering code.
TWG50X20SC suits buyers who want the simplest rod end plus sensing on a 20 mm stroke. The closest sibling is TWG50X20SB, which swaps the round tip for a flat rod face while keeping the magnet; TWG50X20R uses a roller but carries no magnet. If the load arrives fast and needs a damped stop, step up to TWG50X20K, the lever roller with an adjustable oil cushion, or TWG50X20KF to add the F self-lock against the lever pushing the load back. For deeper stops order TWG50X25SC or TWG50X30SC. Check impact load and speed charts in the catalog to confirm the 50 mm bore.
The piston magnet drives a position sensor so the controller knows the round rod stop is extended before the fixture cycle starts.
The round rod tip catches carriers edge-on, and the 20 mm stroke (+1.0/0 mm) clears or engages the part path with a short air cycle through the PT1/8 port.
Mounted on the adjustable flange at 0.15-1.0 MPa, the stopper doubles as a simple gate that the bumper cushion protects through repeated impact cycles.
Double acting, 50 mm bore, 20 mm stroke (+1.0/0 mm), round rod stopper, S magnet for position sensors, adjustable-height flange, PT1/8 port, 0.15-1.0 MPa operating pressure, 1.5 MPa (215 psi) proof pressure, -20 to +70 C, bumper cushion, lubrication not required.
TWG50X20SC ends in a round rod while TWG50X20SB uses a flat rod; both keep the S magnet, the same 50 mm bore and 20 mm stroke, and the same PT1/8 port and pressure range, so the choice comes down to the contact face the load needs.