verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC TWG50 · Adjustable mounting height Stopper Cylinder

Airtac TWG Stop Cylinder TWG50X20SK

Genuine AirTAC adjustable mounting height stopper cylinder, order code TWG50X20SK from the TWG50 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.

  • Stroke20 mm
  • StopperLever roller, adjustable oil cushion
  • MagnetMagnet
  • ActionDouble acting
  • MountingFlange, adjustable mounting height
  • BoreØ50 mm
$117.47 $124.97Save 6%
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every TWG50 stroke, stopper and magnet on one page All TWG50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac TWG Stop Cylinder TWG50X20SK

With a Dia 50 mm bore and a 20 mm stroke (+1.0/0 mm tolerance), the AirTAC TWG50X20SK raises and lowers its stopper as a double acting, flange-mounted cylinder, and the flange lets the mounting height be set directly on the machine. The K option fits the lever roller stopper head paired with an adjustable oil shock absorber, so pallets and boxes are decelerated more gently than with a plain fixed rod.

The S code adds a magnet so position sensors can detect the raised and lowered states. The PT1/8 port feeds air at 0.15-1.0 MPa, the bumper cushions each cycle, and the JIS-conforming design needs no lubrication, running on air filtered by a 40 um element from -20 to +70 C.

Airtac TWG Stop Cylinder TWG50X20SK Technical Specifications

Order codeTWG50X20SK
ProductAdjustable mounting height Stopper Cylinder
Stroke20 mm
StopperLever roller, adjustable oil cushion
MagnetMagnet
ActionDouble acting
MountingFlange, adjustable mounting height
BoreØ50 mm
Strokes20, 25, 30 mm (+1.0/0)
PortPT1/8
Stopper typesRound rod, Flat rod, Roller, Lever roller, adjustable oil cushion
FluidAir (filtered by 40 µm element)
Operating pressure0.15-1.0 MPa
Proof pressure1.5 MPa (215 psi)
Temperature-20 to +70 °C
CushionBumper
LubricationNot required

Source: AirTAC Products Catalog 2026A (PDF01-P0756..P0757), TWG series specifications and ordering code.

How to choose

In the TWG ordering table the stopper letter decides how the load is caught: C is a round rod, B a flat rod, R a roller and K this lever roller with adjustable oil cushion. Pick TWG50X20SK when impact loads arrive fast enough to need the oil shock absorber; choose TWG50X20SKF if the lever must not spring back and shove the stopped load backwards, or TWG50X20SR for a lighter roller head without the cushion. Size the bore with the impact load and speed charts in the catalog.

Applications

conveyor_belt

Pallet accumulation stops

Mounted on the conveyor frame at the height the flange allows, the lever roller catches incoming pallets while the adjustable oil cushion tames the impact at line speed.

warehouse

Sortation lane gating

The built-in magnet feeds a stopper-position signal to the PLC, so upstream diverters only release totes and cartons when the TWG50X20SK is confirmed up or down.

packaging

Carton staging before packing

Boxes queue against the roller lever ahead of a packing station, and the double acting stroke retracts the stop smoothly to release one carton at a time.

FAQ

What are the key figures of the TWG50X20SK?

Dia 50 mm bore, 20 mm stroke with +1.0/0 mm tolerance, double acting, lever roller stopper with adjustable oil cushion, magnet fitted, PT1/8 port, 0.15-1.0 MPa operating pressure, 1.5 MPa (215 psi) proof pressure, -20 to +70 C, bumper cushion, no lubrication required.

How does the lever roller head differ from a plain stopper rod?

The K head swings on a lever and carries an adjustable oil shock absorber, so the deceleration is tuned to the line instead of relying only on the bumper. The TWG50 also uses a thicker piston rod that resists impact better than a standard cylinder rod.