
Genuine AirTAC adjustable mounting height stopper cylinder, order code TWG50X20SKF from the TWG50 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
AirTAC built the F option into the TWG50X20SKF for lines where a stopped load must stay put: the self-lock mechanism stops the lever roller from springing back and pushing the workpiece backwards after impact. Underneath, this remains the Dia 50 mm TWG stopper cylinder with a 20 mm stroke (+1.0/0 mm), double acting and flange mounted so the stopper height is adjusted on the machine.
Because the S magnet is fitted, position sensors report the stopper state to the controller. The lever roller carries the same adjustable oil shock absorber as the K head, the PT1/8 port feeds air at 0.15-1.0 MPa, and the bumper-cushioned, JIS-conforming design runs dry on 40 um filtered air from -20 to +70 C.
| Order code | TWG50X20SKF |
|---|---|
| Product | Adjustable mounting height Stopper Cylinder |
| Stroke | 20 mm |
| Stopper | Lever roller, adjustable oil cushion, self-lock |
| Magnet | Magnet |
| Action | Double acting |
|---|---|
| Mounting | Flange, adjustable mounting height |
| Bore | Ø50 mm |
| Strokes | 20, 25, 30 mm (+1.0/0) |
| Port | PT1/8 |
| Stopper types | Round rod, Flat rod, Roller, Lever roller, adjustable oil cushion |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15-1.0 MPa |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to +70 °C |
| Cushion | Bumper |
| Lubrication | Not required |
Source: AirTAC Products Catalog 2026A (PDF01-P0756..P0757), TWG series specifications and ordering code.
TWG50X20SKF sits beside TWG50X20SK in the ordering table: both use the K lever roller head with adjustable oil cushion and both carry the S magnet, but SKF adds the F self-lock. If spring-back is not a risk on your line, plain TWG50X20SK omits that option; if a simple roller without an oil cushion is enough, move to TWG50X20SR. Round rod (C) and flat rod (B) heads stay the lighter-duty siblings. Confirm impact ratings from the catalog impact load and speed charts before fixing the bore.
On inclines and declines the self-lock keeps the lever from being pushed back by the load, so pallets hold their position until air releases the stopper.
Loads waiting for a forklift at a staging stop are held by the locked lever roller, with the magnet confirming to the system that the stop is actually up.
Workpieces accumulate against the oil-cushioned lever and are released one by one into the machine, the sensor signal preventing feeds while the stopper is down.
Dia 50 mm bore, 20 mm stroke (+1.0/0 mm tolerance), lever roller stopper with adjustable oil cushion plus F self-lock, magnet fitted, double acting, PT1/8 port, 0.15-1.0 MPa working pressure, 1.5 MPa (215 psi) proof pressure, -20 to +70 C, bumper cushion, no lubrication.
Wherever a stopped pallet or box could shove the lever backwards, the catalog notes that the self-lock stops the lever from springing back and pushing the stopped load backwards. With the lock engaged the load holds its position until air retracts the stopper.