verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC TWG50 · Adjustable mounting height Stopper Cylinder

Airtac TWG Stop Cylinder TWG50X25-B

Genuine AirTAC adjustable mounting height stopper cylinder, order code TWG50X25-B from the TWG50 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.

  • Stroke25 mm
  • StopperFlat rod
  • MagnetNo magnet
  • ActionDouble acting
  • MountingFlange, adjustable mounting height
  • BoreØ50 mm
$67.43 $74.93Save 10%
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every TWG50 stroke, stopper and magnet on one page All TWG50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac TWG Stop Cylinder TWG50X25-B

The 25 mm stroke sits in the middle of the TWG50 range and lifts the flat rod just over two full millimetres beyond the 20 mm version, giving extra clearance where the load path sits slightly above the mounting deck. Tolerance is +1.0/0 mm. Because the cylinder is double acting, air both raises the stopper and retracts it, so released loads move off positively instead of relying on gravity to drop the rod.

The flange has an adjustable mounting height, which is the defining feature of the TWG series: you dial the stop face level with the conveyor or fixture before tightening. The cylinder works on filtered air (40 um element) from -20 to +70 C and needs no lubrication over its service life.

Airtac TWG Stop Cylinder TWG50X25-B Technical Specifications

Order codeTWG50X25-B
ProductAdjustable mounting height Stopper Cylinder
Stroke25 mm
StopperFlat rod
MagnetNo magnet
ActionDouble acting
MountingFlange, adjustable mounting height
BoreØ50 mm
Strokes20, 25, 30 mm (+1.0/0)
PortPT1/8
Stopper typesRound rod, Flat rod, Roller, Lever roller, adjustable oil cushion
FluidAir (filtered by 40 µm element)
Operating pressure0.15-1.0 MPa
Proof pressure1.5 MPa (215 psi)
Temperature-20 to +70 °C
CushionBumper
LubricationNot required

Source: AirTAC Products Catalog 2026A (PDF01-P0756..P0757), TWG series specifications and ordering code.

How to choose

Pick this code over TWG50X20-B when the extra 5 mm of rod travel is needed to clear the load, and over TWG50X30-B when the shorter throw keeps the cycle snappier. It stays on the B flat rod face; TWG50X25-C gives a round rod, TWG50X25-R a roller that rides under moving loads, and TWG50X25-K a lever roller with adjustable oil cushion, where the F self-lock option is also available. Add S for a magnet, as this code has none.

Applications

conveyor_belt

Indexing pallets between stations

The rod rises 25 mm to arrest each pallet at the station, then retracts on air so the next pallet indexes through without jamming on a dropped stopper.

factory

Gating between line sections

Mounted through its adjustable height flange, the flat rod acts as a gate at the joint between two conveyor sections, releasing parts only when the downstream section is ready.

tune

Fine height matching on retrofit lines

When a stopper is added to an existing frame, the adjustable flange height plus the mid-range 25 mm stroke let the rod face be brought level with the load carrier without shimming.

FAQ

Which figures define the TWG50X25-B in one place?

Dia 50 mm bore, 25 mm stroke (+1.0/0), double acting, flat rod (B) stopper, adjustable height flange mounting, PT1/8 port, 0.15-1.0 MPa, bumper cushion, no magnet, no lubrication required.

Why choose the flat rod over the roller stopper on the same bore?

The flat rod gives a wide, stable contact face that holds square loads positively in place. The R roller instead lets the load keep rolling over the stopper, which suits diverting rather than stopping. For the softest arrest, the K lever roller with its adjustable oil cushion is the next step up, with the F self-lock available only on that lever version.