verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC TWG50 · Adjustable mounting height Stopper Cylinder

Airtac TWG Stop Cylinder TWG50X25SC

Genuine AirTAC adjustable mounting height stopper cylinder, order code TWG50X25SC from the TWG50 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.

  • Stroke25 mm
  • StopperRound rod
  • MagnetMagnet
  • ActionDouble acting
  • MountingFlange, adjustable mounting height
  • BoreØ50 mm
$65.10 $72.60Save 10%
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every TWG50 stroke, stopper and magnet on one page All TWG50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac TWG Stop Cylinder TWG50X25SC

The TWG50X25SC pairs the simplest stopper head in the TWG50 range, the round rod selected by the C code, with the S magnet option for external position switches. The round rod is a robust, low-profile contact point for halting workpieces and pallets, and the built-in magnet lets a reed switch report whether the stopper is raised or lowered; switch models should be confirmed from the datasheet.

Mechanically it is the standard TWG50 platform: 50 mm bore, 25 mm stroke with a +1.0/0 mm tolerance, double acting, flange mounted so the stopper height is set on the machine. It runs on 0.15-1.0 MPa air filtered by a 40 um element, carries a 1.5 MPa (215 psi) proof pressure, works from -20 to +70 C with a bumper cushion, and needs no lubrication.

Airtac TWG Stop Cylinder TWG50X25SC Technical Specifications

Order codeTWG50X25SC
ProductAdjustable mounting height Stopper Cylinder
Stroke25 mm
StopperRound rod
MagnetMagnet
ActionDouble acting
MountingFlange, adjustable mounting height
BoreØ50 mm
Strokes20, 25, 30 mm (+1.0/0)
PortPT1/8
Stopper typesRound rod, Flat rod, Roller, Lever roller, adjustable oil cushion
FluidAir (filtered by 40 µm element)
Operating pressure0.15-1.0 MPa
Proof pressure1.5 MPa (215 psi)
Temperature-20 to +70 °C
CushionBumper
LubricationNot required

Source: AirTAC Products Catalog 2026A (PDF01-P0756..P0757), TWG series specifications and ordering code.

How to choose

Compare this code with its siblings to see what the options change: TWG50X25C is the identical round-rod stopper without a magnet, so pick the SC when your controller needs position feedback. TWG50X25SB swaps the round rod for a flat rod while keeping the magnet, and TWG50X25SR keeps the magnet but uses a roller head. For softer, cushioned stops the lever-roller TWG50X25SK adds an adjustable oil shock absorber and accepts the F self-lock. The 25 mm stroke sits between the 20 mm and 30 mm variants.

AirtacDistr lists every TWG50 order code with its price on one page at https://airtacdistr.com/products/airtac-twg50-stopper-cylinder

Applications

factory

Workpiece halt before a machining station

The round rod head stops small workpieces on a transfer line, and the magnet lets the PLC confirm the stopper is up before clamping starts.

conveyor_belt

Lane stop with position monitoring

Raise and lower the 25 mm stopper across a conveyor lane while a reed switch on the magnetised piston reports its state to the line controller.

settings

Height-set gating on fixtures

Use the adjustable-height flange to align the round rod exactly with the workpiece edge, then let the magnet signal each cycle to the control system.

FAQ

What are the key figures for the TWG50X25SC?

50 mm bore, 25 mm stroke (+1.0/0 mm tolerance), round rod stopper with magnet, double acting, flange mounting with adjustable height, PT1/8 port, 0.15-1.0 MPa operating pressure, 1.5 MPa (215 psi) proof pressure, -20 to +70 C, bumper cushion, no lubrication required.

What does the S in the order code add over the plain C version?

The S code means a magnet is built into the piston, so an external reed switch can detect the stopper's up or down position. The TWG50X25C without S has no magnet and cannot provide that electrical signal; the mechanical cylinder itself is otherwise the same design.