
Genuine AirTAC adjustable mounting height stopper cylinder, order code TWG50X25SK from the TWG50 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
The TWG50X25SK pairs a Ø50 mm double acting stopper body with the K stopper option: a lever roller fitted with an adjustable oil shock absorber. The roller rides on the moving load and the oil cushion absorbs impact, giving a softer stop than a fixed round or flat rod on the same 25 mm stroke. Mounted on its flange, the cylinder lets you set the stopper height to match the line, and the S option in the code means a magnet is built in for position sensing.
Air comes in through a PT1/8 port over a 0.15-1.0 MPa operating range, with proof pressure of 1.5 MPa (215 psi) and a working temperature of -20 to +70 C. The bumper cushion and the thick piston rod handle repeated impact, lubrication is not required, and the catalog sizing is based on the 40 um filtered air supply and the impact load and speed charts.
| Order code | TWG50X25SK |
|---|---|
| Product | Adjustable mounting height Stopper Cylinder |
| Stroke | 25 mm |
| Stopper | Lever roller, adjustable oil cushion |
| Magnet | Magnet |
| Action | Double acting |
|---|---|
| Mounting | Flange, adjustable mounting height |
| Bore | Ø50 mm |
| Strokes | 20, 25, 30 mm (+1.0/0) |
| Port | PT1/8 |
| Stopper types | Round rod, Flat rod, Roller, Lever roller, adjustable oil cushion |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15-1.0 MPa |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to +70 °C |
| Cushion | Bumper |
| Lubrication | Not required |
Source: AirTAC Products Catalog 2026A (PDF01-P0756..P0757), TWG series specifications and ordering code.
On the ordering table the fourth character is the stopper: C is a round rod, B a flat rod, R a roller and K this lever roller with adjustable oil cushion. Pick TWG50X25SK when pallets or workpieces arrive with energy that a plain rod would slam into, and you want the cushioning tuned on the machine. If the stopped load tends to roll the lever back, step up to TWG50X25SKF, which adds the F self-lock. The S magnet is already fitted here, unlike the blank-code version, so sensor-ready position feedback needs no rework.
Lever roller rides under the passing pallet while the adjustable oil cushion absorbs each arrival on the 25 mm stroke, and the magnet feeds stop-position feedback to the PLC.
At a merge or divert gate the oil-cushioned lever softens the impact of each box, protecting both the workpiece and the stopper on continuous duty.
The flange mounting lets maintenance set stopper height per lane, and the thick piston rod plus bumper cushion resist the repeated hits of incoming totes.
Bore 50 mm, stroke 25 mm (tolerance +1.0/0 mm), double acting, flange mounting with adjustable height, lever roller stopper with adjustable oil cushion (K), magnet fitted (S), port PT1/8, operating pressure 0.15-1.0 MPa, proof pressure 1.5 MPa (215 psi), temperature -20 to +70 C, bumper cushion, lubrication not required, air filtered by a 40 um element.
Use the impact load and speed charts in the AirTAC catalog to check that a Ø50 mm bore on a 25 mm stroke suits your load and arrival speed. Then adjust the oil shock absorber on the lever roller on the machine until the stop is soft but positive; the flange mounting lets you also set the stopper height before committing to a lane position. Confirm remaining details from the datasheet.