
Genuine AirTAC adjustable mounting height stopper cylinder, order code TWG50X25SKF from the TWG50 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
TWG50X25SKF is the self-locking member of the TWG50 stopper family: a Ø50 mm double acting cylinder on a 25 mm stroke, with the K lever roller stopper and the F self-lock option added. The self-lock keeps the lever from springing back and pushing the stopped load backwards, which matters on inclines and anywhere a tilted pallet leans into the stop. Because the code carries S, a magnet is fitted for position sensors.
The unit is flange mounted so the adjustable mounting height can be set on the machine, it takes air through a PT1/8 port at 0.15-1.0 MPa (proof 1.5 MPa, 215 psi) and runs from -20 to +70 C. JIS-aligned design, a bumper cushion and a thick piston rod stand up to repeated impacts, and lubrication is not required.
| Order code | TWG50X25SKF |
|---|---|
| Product | Adjustable mounting height Stopper Cylinder |
| Stroke | 25 mm |
| Stopper | Lever roller, adjustable oil cushion, self-lock |
| Magnet | Magnet |
| Action | Double acting |
|---|---|
| Mounting | Flange, adjustable mounting height |
| Bore | Ø50 mm |
| Strokes | 20, 25, 30 mm (+1.0/0) |
| Port | PT1/8 |
| Stopper types | Round rod, Flat rod, Roller, Lever roller, adjustable oil cushion |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15-1.0 MPa |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to +70 °C |
| Cushion | Bumper |
| Lubrication | Not required |
Source: AirTAC Products Catalog 2026A (PDF01-P0756..P0757), TWG series specifications and ordering code.
This code combines two letters that are chosen separately in the ordering table: K, the lever roller with adjustable oil cushion, and F, the self-lock that is available on the lever roller only. Choose TWG50X25SKF over TWG50X25SK when the stopped load could push the lever backwards; choose plain TWG50X25SK where that risk is absent. Against TWG50X25SR (roller) or the C and B rod stoppers, this version offers the softest stop with the locking function. The 20 mm and 30 mm strokes exist if 25 mm does not match your line.
Where gravity-fed lines carry pallets down a slight grade, the self-lock lever holds the load in place instead of letting it shove the stopper backwards.
The adjustable oil cushion takes the arrival energy on the 25 mm stroke while the magnet confirms the stop position to the control system.
The self-lock keeps the lever immobile so workpieces present at a fixed reference point for operators or pick-and-place handling.
Bore 50 mm, stroke 25 mm (tolerance +1.0/0 mm), double acting, flange mounting with adjustable height, lever roller stopper with adjustable oil cushion plus F self-lock, magnet fitted (S), port PT1/8, operating pressure 0.15-1.0 MPa, proof pressure 1.5 MPa (215 psi), temperature -20 to +70 C, bumper cushion, no lubrication required.
The F option is defined in the catalog as self-lock, available for the lever roller stopper only. It prevents the lever from springing back and pushing the stopped load backwards, a real risk on slopes or with heavy, unbalanced pallets. If your line is level and loads arrive gently, TWG50X25SK gives the same lever roller and oil cushion without the lock; confirm the exact mechanical behavior from the datasheet.