
Genuine AirTAC adjustable mounting height stopper cylinder, order code TWG50X30-B from the TWG50 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
This is the longest-stroke member of the TWG50 flat rod family: 30 mm of lift, tolerance +1.0/0 mm, giving the greatest clearance between the lowered rod and the load path of the three stroke options. That extra travel helps where the stopper must drop fully clear under continuous product flow and then rise above a raised rail or guide. The double acting Dia 50 bore drives the rod both ways on air, with a bumper cushion at the end of travel.
The cylinder is rated for 0.15-1.0 MPa working pressure and withstands 1.5 MPa (215 psi) proof pressure, so brief supply spikes will not damage it. Like the rest of the series it mounts on a flange with adjustable height, resists impact thanks to its thick piston rod, and runs from -20 to +70 C without lubrication.
| Order code | TWG50X30-B |
|---|---|
| Product | Adjustable mounting height Stopper Cylinder |
| Stroke | 30 mm |
| Stopper | Flat rod |
| Magnet | No magnet |
| Action | Double acting |
|---|---|
| Mounting | Flange, adjustable mounting height |
| Bore | Ø50 mm |
| Strokes | 20, 25, 30 mm (+1.0/0) |
| Port | PT1/8 |
| Stopper types | Round rod, Flat rod, Roller, Lever roller, adjustable oil cushion |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15-1.0 MPa |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to +70 °C |
| Cushion | Bumper |
| Lubrication | Not required |
Source: AirTAC Products Catalog 2026A (PDF01-P0756..P0757), TWG series specifications and ordering code.
Choose TWG50X30-B over TWG50X25-B and TWG50X20-B when the rod must retract well clear of passing loads or clear a raised rail. The B flat rod holds square loads firmly; the C round rod and R roller trade that grip for simpler contact, while the K lever roller with adjustable oil cushion and optional F self-lock gives the softest, most load-friendly stop. If sensors must detect rod position, order the S magnet variant instead of this no-magnet code.
The 30 mm retraction drops the flat rod fully clear of the product stream, letting items pass uninterrupted until the stopper is signalled to rise.
Positioned by its adjustable height flange, the rod rises to present parts to a loading nest and retracts the full 30 mm so the nest can unload without interference.
Cases arriving at a wrapper or case packer are held square against the wide flat face, and the Dia 50 bore with bumper cushion absorbs the stop at infeed speed.
Dia 50 mm bore, 30 mm stroke (+1.0/0), double acting, flat rod stopper, flange with adjustable mounting height, PT1/8 port, 0.15-1.0 MPa operating, 1.5 MPa (215 psi) proof, -20 to +70 C, bumper cushion, no magnet.
This code uses a bumper cushion, which softens the rod stop but does not lock the lever. If the stopped load must not be pushed back by spring-back, the catalog answer is the K lever roller stopper combined with the F self-lock option, so specify TWG50X30-K-F instead. Size the bore against the impact load and speed charts in the catalog before ordering.