verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC TWG50 · Adjustable mounting height Stopper Cylinder

Airtac TWG Stop Cylinder TWG50X30K

Genuine AirTAC adjustable mounting height stopper cylinder, order code TWG50X30K from the TWG50 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.

  • Stroke30 mm
  • StopperLever roller, adjustable oil cushion
  • MagnetNo magnet
  • ActionDouble acting
  • MountingFlange, adjustable mounting height
  • BoreØ50 mm
$117.47 $124.97Save 6%
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every TWG50 stroke, stopper and magnet on one page All TWG50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac TWG Stop Cylinder TWG50X30K

Stopper code K puts a lever roller with an adjustable oil shock absorber on the TWG50 body: a double acting, flange mounted cylinder of Dia 50 mm bore and 30 mm stroke (+1.0/0 mm). A moving pallet can roll onto the lever before the oil cushion takes the remaining energy, giving a softer catch than the contact-only round rod or flat rod stoppers.

The cylinder runs on 0.15 to 1.0 MPa of air through PT1/8 ports (proof pressure 1.5 MPa / 215 psi), filtered by a 40 um element, with a bumper cushion inside and no lubrication required. Mounting height is set at the flange so the lever meets the load on the correct line, and the operating range is -20 to +70 C. No magnet is included in this code. If spring-back must be prevented as well, step up to the TWG50X30KF with the F self-lock.

Airtac TWG Stop Cylinder TWG50X30K Technical Specifications

Order codeTWG50X30K
ProductAdjustable mounting height Stopper Cylinder
Stroke30 mm
StopperLever roller, adjustable oil cushion
MagnetNo magnet
ActionDouble acting
MountingFlange, adjustable mounting height
BoreØ50 mm
Strokes20, 25, 30 mm (+1.0/0)
PortPT1/8
Stopper typesRound rod, Flat rod, Roller, Lever roller, adjustable oil cushion
FluidAir (filtered by 40 µm element)
Operating pressure0.15-1.0 MPa
Proof pressure1.5 MPa (215 psi)
Temperature-20 to +70 °C
CushionBumper
LubricationNot required

Source: AirTAC Products Catalog 2026A (PDF01-P0756..P0757), TWG series specifications and ordering code.

How to choose

Among the 30 mm stroke stoppers, K sits between the contact-only rods (C round rod, B flat rod, R roller) and the self-locking TWG50X30KF. Pick TWG50X30K when the conveyor tolerates a little rebound and you want the adjustable oil cushion to absorb impact; pick R when no cushioning is needed; pick the F suffix when the lever must not spring back and push the load backwards. None of these variants carry the S magnet.

Applications

conveyor_belt

Gentle pallet accumulation stops

The lever roller lets arriving pallets ride onto the wheel while the adjustable oil shock absorber bleeds off impact, protecting light conveyor structures fed at 0.15 to 1.0 MPa.

tune

Tuning the stop to load speed

Because the oil cushion is adjustable, the same Dia 50, 30 mm stroke unit can be retuned on the machine as line speeds change, without swapping the stopper type.

warehouse

Carton handoff at transfer points

At transfers where boxes arrive unevenly, the roller contact plus flange adjustable mounting height keeps the lever aligned to the product line through the PT1/8 fed double acting cycle.

FAQ

What are the key figures of the TWG50X30K?

Dia 50 mm bore, 30 mm stroke (+1.0/0 mm tolerance), double acting, lever roller stopper (code K) with adjustable oil cushion, no magnet, PT1/8 port, operating pressure 0.15 to 1.0 MPa with 1.5 MPa (215 psi) proof pressure, -20 to +70 C, bumper cushion, 40 um filtered air, no lubrication required.

How is this different from TWG50X30KF?

Both share the lever roller with adjustable oil cushion on the same Dia 50 bore and 30 mm stroke. The KF adds the F self-lock, which stops the lever from springing back and pushing the stopped load backwards; TWG50X30K relies on the cushion alone, so choose it where slight rebound is acceptable.