verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC TWG50 · Adjustable mounting height Stopper Cylinder

Airtac TWG Stop Cylinder TWG50X30SC

Genuine AirTAC adjustable mounting height stopper cylinder, order code TWG50X30SC from the TWG50 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.

  • Stroke30 mm
  • StopperRound rod
  • MagnetMagnet
  • ActionDouble acting
  • MountingFlange, adjustable mounting height
  • BoreØ50 mm
$67.22 $74.72Save 10%
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every TWG50 stroke, stopper and magnet on one page All TWG50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac TWG Stop Cylinder TWG50X30SC

The TWG50X30SC is the round-rod, magnet-equipped version of the AirTAC TWG50 adjustable-height stopper cylinder. It is double acting, Dia 50 mm bore, with a 30 mm stroke (tolerance +1.0/0 mm) and a flange mount whose height you set on the machine, making it suitable for stopping pallets, boxes and workpieces on conveyor lines.

Because the S option adds a magnet, the cylinder supports position sensors so the controller can confirm the stop is raised or lowered. Run filtered air (40 um element) at 0.15 to 1.0 MPa through the PT1/8 port. The unit carries a bumper cushion, follows JIS standards, needs no lubrication, and is rated for -20 to +70 C.

Airtac TWG Stop Cylinder TWG50X30SC Technical Specifications

Order codeTWG50X30SC
ProductAdjustable mounting height Stopper Cylinder
Stroke30 mm
StopperRound rod
MagnetMagnet
ActionDouble acting
MountingFlange, adjustable mounting height
BoreØ50 mm
Strokes20, 25, 30 mm (+1.0/0)
PortPT1/8
Stopper typesRound rod, Flat rod, Roller, Lever roller, adjustable oil cushion
FluidAir (filtered by 40 µm element)
Operating pressure0.15-1.0 MPa
Proof pressure1.5 MPa (215 psi)
Temperature-20 to +70 °C
CushionBumper
LubricationNot required

Source: AirTAC Products Catalog 2026A (PDF01-P0756..P0757), TWG series specifications and ordering code.

How to choose

C selects the round rod and S adds the magnet, so this code is the sensing counterpart of the plain TWG50X30C. Compare B for a flat rod face or R for a roller if the load interaction matters more than the rod shape; for the softest stop choose K, the lever roller with adjustable oil cushion, to which the F self-lock can be added. At Dia 50 mm the neighboring strokes are 20 and 25 mm, so this 30 mm code offers the longest lift in the series.

Applications

conveyor_belt

Sensor-monitored pallet stops

The magnet lets the PLC read stopper position, so downstream transfer only starts once the pallet is actually released.

factory

Workpiece locating on assembly lines

The round rod face locates workpieces at a fixed point, with flange height adjusted to line up with the conveyor deck.

check_circle

Stop-verify-proceed stations

Where an error-proofing step requires the stop state to be confirmed, the magnet-equipped S build is the correct choice over magnet-free codes.

FAQ

What are the key figures of the TWG50X30SC?

Dia 50 mm bore, 30 mm stroke (+1.0/0), double acting, round rod stopper, magnet included (S option), PT1/8 port, operating pressure 0.15-1.0 MPa, proof pressure 1.5 MPa (215 psi), temperature -20 to +70 C, bumper cushion, no lubrication required.

Which stopper and lock choices apply if this round rod does not fit my load?

Stay on the same bore, stroke and magnet by switching the stopper letter: B gives a flat rod, R a roller. K gives a lever roller with adjustable oil cushion, and only K accepts the F self-lock that prevents the lever from springing back and pushing the stopped load backwards.