verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC TWG50 · Adjustable mounting height Stopper Cylinder

Airtac TWG Stop Cylinder TWG50X30SK

Genuine AirTAC adjustable mounting height stopper cylinder, order code TWG50X30SK from the TWG50 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.

  • Stroke30 mm
  • StopperLever roller, adjustable oil cushion
  • MagnetMagnet
  • ActionDouble acting
  • MountingFlange, adjustable mounting height
  • BoreØ50 mm
$121.66 $129.16Save 5%
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every TWG50 stroke, stopper and magnet on one page All TWG50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac TWG Stop Cylinder TWG50X30SK

The TWG50X30SK combines the Dia 50 mm TWG stopper cylinder body with a 30 mm stroke (tolerance +1.0/0 mm) and the K-coded stopper: a lever roller fitted with an adjustable oil shock absorber. The S in the order code confirms a built-in magnet, so position sensors can report the raised and lowered states without extra hardware. Air through the PT1/8 ports raises and lowers the lever, while the bumper cushion and oil absorber soften the contact when a pallet or box rolls in.

The series works on 0.15-1.0 MPa with 1.5 MPa (215 psi) proof pressure and -20 to +70 C temperature, on air filtered by a 40 um element; lubrication is not required. The flange with adjustable mounting height lets you set the stopper to the load line on the machine, and the thicker piston rod of the TWG50 resists impact better than a standard rod. Size the Dia 50 bore against the catalog impact load and speed charts before ordering.

Airtac TWG Stop Cylinder TWG50X30SK Technical Specifications

Order codeTWG50X30SK
ProductAdjustable mounting height Stopper Cylinder
Stroke30 mm
StopperLever roller, adjustable oil cushion
MagnetMagnet
ActionDouble acting
MountingFlange, adjustable mounting height
BoreØ50 mm
Strokes20, 25, 30 mm (+1.0/0)
PortPT1/8
Stopper typesRound rod, Flat rod, Roller, Lever roller, adjustable oil cushion
FluidAir (filtered by 40 µm element)
Operating pressure0.15-1.0 MPa
Proof pressure1.5 MPa (215 psi)
Temperature-20 to +70 °C
CushionBumper
LubricationNot required

Source: AirTAC Products Catalog 2026A (PDF01-P0756..P0757), TWG series specifications and ordering code.

How to choose

Within the TWG50 stopper family, C is a round rod, B a flat rod and R a plain roller; only K brings the lever roller with the adjustable oil cushion, and this SK code adds the S magnet on top of it. If the stopped load tends to spring the lever back and roll backwards, step up to TWG50X30SKF, which adds the F self-lock to the same lever. If a softer stop is not needed, TWG50X30SR with the plain roller is the lighter-duty choice.

Applications

conveyor_belt

Pallet line stop

The lever roller with adjustable oil cushion receives rolling pallets gently, while the magnet lets a switch confirm the stopper is raised before the next transfer.

packaging

Carton gating

On packaging conveyors, the 30 mm lift holds cartons at a gate station and the Dia 50 bore handles the impact loads from the incoming stream.

warehouse

Sortation stop

The adjustable flange height sets the lever exactly to the load line, so mixed-height totes can be released one lane at a time.

FAQ

What are the key figures of the TWG50X30SK?

Double acting, Dia 50 mm bore, 30 mm stroke with +1.0/0 mm tolerance, PT1/8 ports, 0.15-1.0 MPa operating pressure, 1.5 MPa (215 psi) proof pressure, -20 to +70 C, bumper cushion, lever roller stopper with adjustable oil cushion, built-in magnet, no lubrication required on 40 um filtered air.

What does the magnet in this code actually do?

The S in the order code means a magnet is built into the piston, so position switches mounted on the body can detect the raised and lowered ends of the 30 mm stroke. Confirm the matching switch model from the datasheet before wiring it into your control system.