
Genuine AirTAC fixed mounting height stopper cylinder, order code TWQ32X10-B from the TWQ32 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
The TWQ32X10-B is the shortest-stroke code in the TWQ32 flat rod group: 10 mm of travel with a +1.0/0 tolerance on a 32 mm bore, double acting, with the flat rod stopper head. A short stroke lifts the stop into the load path and back out quickly, which suits high-cycle stop-and-release duty on packed conveyor sections.
The operating range is 0.15-1.0 MPa with 1.5 MPa (215 psi) proof pressure and -20 to +70 C; the air must be filtered by a 40 um element and no lubrication is needed. Mount through holes or the tapped holes at both ends, connect a PT1/8 supply, and note the sensor grooves machined on the two body sides.
| Order code | TWQ32X10-B |
|---|---|
| Product | Fixed mounting height Stopper Cylinder |
| Stroke | 10 mm |
| Stopper | Flat rod |
| Magnet | No magnet |
| Action | Double acting |
|---|---|
| Mounting | Through holes, tapped both ends |
| Bore | Ø32 mm |
| Strokes | 10, 15, 20 mm (+1.0/0) |
| Port | PT1/8 |
| Stopper types | Round rod, Flat rod, Roller, Lever roller, adjustable oil cushion |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15-1.0 MPa |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to +70 °C |
| Cushion | Bumper |
| Lubrication | Not required |
Source: AirTAC Products Catalog 2026A (PDF01-P0760..P0761), TWQ series specifications and ordering code.
X10 fits where clearance above the return path is tight and only 10 mm of stopper travel is required; TWQ32X15-B and TWQ32X20-B cover the 15 mm and 20 mm variants on the same flat rod head. Every TWQ32 code shares the 32 mm bore, double acting action and PT1/8 port. The self-lock F suffix applies only to the K lever roller option, not to this B code, and no magnet is fitted here.
Cycles a 10 mm lift at busy transfer points where the flat rod must clear the load path briefly between carriers.
Uses the shortest stroke to stop cartons one by one ahead of a divert, limiting travel per cycle.
Acts as the final stop for boxes feeding a packing station, sized per the catalog impact load and speed charts.
Bore 32 mm; stroke 10 mm (+1.0/0); double acting; flat rod stopper, no magnet; PT1/8 port; operating pressure 0.15-1.0 MPa; proof pressure 1.5 MPa (215 psi); temperature -20 to +70 C; bumper cushion; through hole or tapped both-ends mounting.
Both must be specified in the ordering code: S adds a magnet for position sensing and F adds self-lock, but F applies only to the lever roller (K) stopper, not the flat rod (B) on this code. As ordered, the TWQ32X10-B has no magnet; confirm switch compatibility from the datasheet.