
Genuine AirTAC fixed mounting height stopper cylinder, order code TWQ32X10K from the TWQ32 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
The AirTAC TWQ32X10K takes the Dia 32 mm TWQ stopper cylinder and fits the K lever roller stopper with an adjustable oil shock absorber, on a 10 mm stroke with a +1.0/0 mm tolerance. Double acting air through the PT1/8 port raises and lowers the stopper over a 0.15-1.0 MPa range, the bumper cushion serves the cylinder stroke itself, and the mounting can be by through holes or the tapped holes at both ends.
The rolling lever contact is gentler on the load than a fixed rod, and the adjustable oil cushion lets you tune how softly the stopped pallet or carton is caught. Keep in mind what this code omits: the F self-lock is not fitted, and in the catalog it is the F option that stops the lever springing back and pushing a stopped load backwards. The cylinder needs no lubrication, runs on air filtered by a 40 um element, follows JIS standards, and this code carries no magnet.
| Order code | TWQ32X10K |
|---|---|
| Product | Fixed mounting height Stopper Cylinder |
| Stroke | 10 mm |
| Stopper | Lever roller, adjustable oil cushion |
| Magnet | No magnet |
| Action | Double acting |
|---|---|
| Mounting | Through holes, tapped both ends |
| Bore | Ø32 mm |
| Strokes | 10, 15, 20 mm (+1.0/0) |
| Port | PT1/8 |
| Stopper types | Round rod, Flat rod, Roller, Lever roller, adjustable oil cushion |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15-1.0 MPa |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to +70 °C |
| Cushion | Bumper |
| Lubrication | Not required |
Source: AirTAC Products Catalog 2026A (PDF01-P0760..P0761), TWQ series specifications and ordering code.
Choose TWQ32X10K when the load arrives fast or with a delicate surface and the adjustable oil cushion is worth the step up from TWQ32X10C round rod, TWQ32X10B flat rod or TWQ32X10R roller. If back-pushed loads are a risk on your line, TWQ32X10KF is the same stopper with the F self-lock added. For more dwell height there are TWQ32X15K and TWQ32X20K, and the S magnet option brings position-switch capability.
Adjust the oil cushion to match line speed and load, catching boxes and totes without the hard knock a fixed rod stop gives.
Gives forklift and pallet-handling stations a rolling lever face that rides under the load edge and lifts it to a fixed stopper height.
Stops products with painted or wrapped faces on conveyor lines, the roller contact avoiding the scuffing a round rod can cause.
Dia 32 mm bore, 10 mm stroke (+1.0/0 mm), double acting, K lever roller stopper with adjustable oil cushion, PT1/8 port, operating pressure 0.15-1.0 MPa, proof pressure 1.5 MPa (215 psi), temperature -20 to +70 C, bumper cushion, no lubrication required, no magnet.
Both share the lever roller stopper and adjustable oil cushion on the Dia 32 mm body. The KF adds the F self-lock, which stops the lever from springing back and pushing the stopped load backwards; on the plain K that protection is not fitted, so confirm the load direction from the datasheet before ordering.