
Genuine AirTAC fixed mounting height stopper cylinder, order code TWQ32X10KF from the TWQ32 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
The AirTAC TWQ32X10KF is the fully featured lever stopper in the Dia 32 mm TWQ range: a K lever roller with adjustable oil shock absorber plus the F self-lock, on a 10 mm stroke with +1.0/0 mm tolerance. The self-lock keeps the lever from springing back and pushing the stopped load backwards, which matters wherever upstream flow or line gradient presses pallets against the stop. Air through the PT1/8 port raises and lowers the stopper across 0.15-1.0 MPa, double acting.
Like every TWQ32 code it mounts through holes or the tapped holes at both ends, needs no lubrication, uses air filtered by a 40 um element and follows JIS standards. The bumper cushion handles the cylinder stroke while the oil shock absorber tunes the load stop, and the thicker piston rod resists impact. This order code includes no magnet, so switch feedback would require the S option; the body still carries sensor grooves on two sides.
| Order code | TWQ32X10KF |
|---|---|
| Product | Fixed mounting height Stopper Cylinder |
| Stroke | 10 mm |
| Stopper | Lever roller, adjustable oil cushion, self-lock |
| Magnet | No magnet |
| Action | Double acting |
|---|---|
| Mounting | Through holes, tapped both ends |
| Bore | Ø32 mm |
| Strokes | 10, 15, 20 mm (+1.0/0) |
| Port | PT1/8 |
| Stopper types | Round rod, Flat rod, Roller, Lever roller, adjustable oil cushion |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15-1.0 MPa |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to +70 °C |
| Cushion | Bumper |
| Lubrication | Not required |
Source: AirTAC Products Catalog 2026A (PDF01-P0760..P0761), TWQ series specifications and ordering code.
TWQ32X10KF is the choice over TWQ32X10K whenever a stopped load could be driven backwards by line pressure, gravity or the lever's own spring-back, because only the F option locks the lever. If the load never presses back, the plain TWQ32X10K saves the self-lock feature. Compared with fixed-end codes TWQ32X10C, TWQ32X10B and TWQ32X10R, the KF keeps the rolling lever contact and adjustable oil cushion. Taller variants are TWQ32X15KF and TWQ32X20KF.
Holds pallets in accumulation where upstream loads push against the stop, the self-lock preventing the lever from being driven back into the load path.
Stops cartons on gravity-fed or declining conveyor runs, locking the lever so the stopped load stays put instead of being pushed backwards.
Use the adjustable oil cushion to soften each catch and the self-lock to hold the load, releasing pallets one position at a time on a transfer line.
Dia 32 mm bore, 10 mm stroke (+1.0/0 mm), double acting, K lever roller stopper with adjustable oil cushion and F self-lock, PT1/8 port, operating pressure 0.15-1.0 MPa, proof pressure 1.5 MPa (215 psi), temperature -20 to +70 C, bumper cushion, no lubrication required, no magnet.
The F option stops the lever from springing back and pushing the stopped load backwards after it has been caught. Without F, as on the TWQ32X10K, the same lever roller and adjustable oil cushion are fitted but that anti-return lock is not, so confirm the load direction on the datasheet when deciding between the two codes.