
Genuine AirTAC fixed mounting height stopper cylinder, order code TWQ32X10SC from the TWQ32 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
TWQ32X10SC is the Dia 32 mm TWQ stopper cylinder in its round-rod form (ordering letter C) with the S magnet option, delivering a 10 mm lift in double acting mode. The round rod end is the most direct catch face of the series, and the magnet turns the two sensor grooves on the body sides into live detection points, so the control system knows the stopper's state before product release.
Like the rest of the series it mounts at fixed height through holes or via the tapped holes at both ends, breathes through a PT1/8 port on 0.15-1.0 MPa filtered air, and closes with a bumper cushion. The impact-resistant piston rod, JIS-aligned design, no-lubrication operation and 1.5 MPa (215 psi) proof rating come straight from the TWQ32 catalog data, valid across the -20 to +70 C working range.
| Order code | TWQ32X10SC |
|---|---|
| Product | Fixed mounting height Stopper Cylinder |
| Stroke | 10 mm |
| Stopper | Round rod |
| Magnet | Magnet |
| Action | Double acting |
|---|---|
| Mounting | Through holes, tapped both ends |
| Bore | Ø32 mm |
| Strokes | 10, 15, 20 mm (+1.0/0) |
| Port | PT1/8 |
| Stopper types | Round rod, Flat rod, Roller, Lever roller, adjustable oil cushion |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15-1.0 MPa |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to +70 °C |
| Cushion | Bumper |
| Lubrication | Not required |
Source: AirTAC Products Catalog 2026A (PDF01-P0760..P0761), TWQ series specifications and ordering code.
Against its siblings, TWQ32X10C is the same round-rod stopper without a magnet for lines that need no feedback, while TWQ32X10SB offers a flat contact face with magnet and TWQ32X10SR keeps the magnet but adds rolling contact. When stopping loads that hit hard or must not spring back, move to TWQ32X10K, the lever roller with adjustable oil cushion, where the F self-lock option lives. If 10 mm is the wrong lift, the Dia 32 bore also runs 15 mm and 20 mm strokes at +1.0/0 tolerance.
The magnet in the piston lets groove-mounted switches prove the round-rod stopper is up before the next pallet is released.
A point-contact round rod singles out one workpiece at the machine infeed, with the 10 mm stroke cycling on a PT1/8 connection.
Position feedback from the S magnet lets a robot cell confirm the part is held at the stop position before gripping starts.
Dia 32 mm bore, 10 mm stroke (+1.0/0), round rod stopper with magnet, double acting, PT1/8 port, 0.15-1.0 MPa operating pressure, 1.5 MPa (215 psi) proof pressure, bumper cushion, -20 to +70 C, air filtered by a 40 um element, no lubrication required, through-holes or tapped-both-ends mounting.
The round rod (C) is the series' simplest catch face, and pairing it with the S magnet gives position feedback that the unmagnetized TWQ32X10C cannot provide. It suits point-contact stops where you do not need the wider flat rod (B), rolling action (R), or the lever roller's oil cushion and F self-lock (K). Size the bore against the catalog impact load and speed charts.