
Genuine AirTAC fixed mounting height stopper cylinder, order code TWQ32X15-B from the TWQ32 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
In the middle of the TWQ stroke range, the TWQ32X15-B gives 15 mm of travel with a +1.0/0 tolerance on a 32 mm bore, with the flat rod (B) stopper head. Double acting control means air raises the stop into the load path and retracts it again, and the fixed mounting height design keeps the stopper face at a constant level along the conveyor.
The cylinder runs on air filtered by a 40 um element at 0.15-1.0 MPa, tolerates 1.5 MPa (215 psi) proof pressure and -20 to +70 C, and needs no lubrication. It follows JIS standards, mounts through holes or the tapped holes at both ends, and takes air through a PT1/8 port.
| Order code | TWQ32X15-B |
|---|---|
| Product | Fixed mounting height Stopper Cylinder |
| Stroke | 15 mm |
| Stopper | Flat rod |
| Magnet | No magnet |
| Action | Double acting |
|---|---|
| Mounting | Through holes, tapped both ends |
| Bore | Ø32 mm |
| Strokes | 10, 15, 20 mm (+1.0/0) |
| Port | PT1/8 |
| Stopper types | Round rod, Flat rod, Roller, Lever roller, adjustable oil cushion |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15-1.0 MPa |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to +70 °C |
| Cushion | Bumper |
| Lubrication | Not required |
Source: AirTAC Products Catalog 2026A (PDF01-P0760..P0761), TWQ series specifications and ordering code.
Choose X15 when 10 mm of lift is too little to clear the passing load but 20 mm is more travel than the layout needs; the 15 mm stroke sits between TWQ32X10-B and TWQ32X20-B on the same flat rod head and 32 mm bore. All three are double acting with a PT1/8 port. Add the S suffix for a magnet if you need position sensing, which this code does not include.
Raises the flat rod 15 mm to catch totes at merge points, then retracts fully to let the next carrier pass.
Holds parts at a robot pick position, with the 15 mm stroke matched to the gap under the part or pallet.
Divides a moving queue into batches by cycling the stopper between its raised and retracted positions.
Bore 32 mm; stroke 15 mm (+1.0/0); double acting; flat rod stopper with no magnet; PT1/8 port; operating pressure 0.15-1.0 MPa; proof pressure 1.5 MPa (215 psi); temperature -20 to +70 C; bumper cushion; through hole or tapped both-ends mounting.
The stroke must lift the stopper clear of the load carrier without more travel time than the cycle allows. X15 is the mid option between TWQ32X10-B and TWQ32X20-B on the same bore. If you need sensor switching, the S magnet option exists in the ordering code, but this version is supplied without a magnet.