
Genuine AirTAC fixed mounting height stopper cylinder, order code TWQ32X15C from the TWQ32 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
The AirTAC TWQ32X15C is a fixed mounting height stopper cylinder with a Dia 32 mm bore and a 15 mm stroke, rising and falling to stop pallets and workpieces travelling along a conveyor. The C in the order code specifies the round rod stopper at the rod end, the simplest head in the TWQ range, and the double acting design uses compressed air both to raise and to lower the stopper.
Air supply connects through a PT1/8 port and the operating range is 0.15-1.0 MPa with 1.5 MPa (215 psi) proof pressure, from -20 to +70 C. The body is mounted through holes or the tapped holes at both ends, carries sensor grooves on two sides, follows JIS standards and needs no lubrication. Because this code has no S suffix, no magnet is built in.
| Order code | TWQ32X15C |
|---|---|
| Product | Fixed mounting height Stopper Cylinder |
| Stroke | 15 mm |
| Stopper | Round rod |
| Magnet | No magnet |
| Action | Double acting |
|---|---|
| Mounting | Through holes, tapped both ends |
| Bore | Ø32 mm |
| Strokes | 10, 15, 20 mm (+1.0/0) |
| Port | PT1/8 |
| Stopper types | Round rod, Flat rod, Roller, Lever roller, adjustable oil cushion |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15-1.0 MPa |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to +70 °C |
| Cushion | Bumper |
| Lubrication | Not required |
Source: AirTAC Products Catalog 2026A (PDF01-P0760..P0761), TWQ series specifications and ordering code.
Pick TWQ32X15C when you want the plain round rod head: contact is a single fixed rod, best for straightforward stop-and-release duties. Choose TWQ32X15B for a flat rod face, TWQ32X15R to roll under the load, or TWQ32X15K and TWQ32X15KF when the impact needs the lever roller with adjustable oil cushion. All TWQ32X15 versions share the same 15 mm stroke; move to X10 or X20 if the lift height must change. If you later need position sensing, order the S-suffixed equivalent, since this code is supplied without magnet.
The round rod rises 15 mm into the pallet path and the Dia 32 double acting body with its thicker piston rod resists repeated impact at each station.
Air up, air down through the PT1/8 port lets one valve station set the part against a fixture, with the bumper cushion softening each cycle.
The 0.15-1.0 MPa operating band fits standard plant air, and the two-side sensor grooves accept switch brackets even though this unit is supplied without magnet.
Dia 32 mm bore, double acting, 15 mm stroke (+1.0/0 tolerance), round rod stopper, PT1/8 port, 0.15-1.0 MPa operating pressure, 1.5 MPa (215 psi) proof pressure, -20 to +70 C, bumper cushion, no lubrication required, mounting by through holes or tapped holes at both ends, no magnet fitted.
C selects the round rod stopper among the TWQ options (C round rod, B flat rod, R roller, K lever roller with adjustable oil cushion). There is no S in this order code, so the cylinder ships without a magnet; add S to the code if your control system needs magnetic position sensing.