
Genuine AirTAC fixed mounting height stopper cylinder, order code TWQ32X15K from the TWQ32 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
The AirTAC TWQ32X15K is the cushioned version of the Dia 32 mm fixed height stopper cylinder. Its K suffix specifies the lever roller stopper combined with an adjustable oil shock absorber, so the head not only rolls under the oncoming load but also decelerates it more gently than a rigid rod end can.
The cylinder is double acting: air through the PT1/8 port raises the lever and air on the other side lowers it. Operating pressure is 0.15-1.0 MPa against 1.5 MPa (215 psi) proof pressure, usable from -20 to +70 C with a 15 mm stroke (+1.0/0). Mounting is by through holes or the tapped holes at both ends, sensor grooves run along two sides of the body, and no lubrication is required. No magnet is fitted on this code.
| Order code | TWQ32X15K |
|---|---|
| Product | Fixed mounting height Stopper Cylinder |
| Stroke | 15 mm |
| Stopper | Lever roller, adjustable oil cushion |
| Magnet | No magnet |
| Action | Double acting |
|---|---|
| Mounting | Through holes, tapped both ends |
| Bore | Ø32 mm |
| Strokes | 10, 15, 20 mm (+1.0/0) |
| Port | PT1/8 |
| Stopper types | Round rod, Flat rod, Roller, Lever roller, adjustable oil cushion |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15-1.0 MPa |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to +70 °C |
| Cushion | Bumper |
| Lubrication | Not required |
Source: AirTAC Products Catalog 2026A (PDF01-P0760..P0761), TWQ series specifications and ordering code.
Within the TWQ32X15 family, TWQ32X15K is the choice when the arriving load is fast, heavy or delicate enough to need a damped stop: the adjustable oil shock absorber absorbs impact that the C round rod or B flat rod would pass straight into the machine frame. If the stopped load must not be pushed backwards by the lever springing up, step up to TWQ32X15KF, which adds the F self-lock. For a simple rolling contact without cushioning, use TWQ32X15R instead. All share the same 15 mm stroke and PT1/8 port, and none of these three codes include a magnet.
The lever roller rolls under the pallet while the adjustable oil shock absorber bleeds off impact energy, protecting both load and frame at each stop.
Cycles from -20 to +70 C and 0.15-1.0 MPa plant air suit dock and staging conveyors, with the thicker piston rod taking the repeated blows.
Because the oil cushion is adjustable, each stopper on the line can be set to match the load it catches, using the same Dia 32 double acting body.
Dia 32 mm bore, double acting, 15 mm stroke (+1.0/0 tolerance), lever roller stopper with adjustable oil shock absorber, PT1/8 port, 0.15-1.0 MPa operating pressure, 1.5 MPa (215 psi) proof pressure, -20 to +70 C, bumper cushion, no lubrication required, through-hole or both-ends tapped mounting, no magnet fitted.
K adds the lever roller with an adjustable oil cushion, giving a softer, tunable stop than the R roller or the C and B rods. The KF code is the same lever roller plus the F self-lock, which stops the lever from springing back and pushing the load backwards; TWQ32X15K does not include that self-lock.