
Genuine AirTAC fixed mounting height stopper cylinder, order code TWQ32X15KF from the TWQ32 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
The AirTAC TWQ32X15KF is a Dia 32 mm fixed height stopper cylinder whose order code carries two head options at once: K for the lever roller stopper with adjustable oil shock absorber, and F for the self-lock. The self-lock stops the lever from springing back up and pushing the stopped load backwards, which matters wherever a pallet must hold position after it has been caught.
The cylinder is double acting, raising and lowering the stopper with air through its PT1/8 port at 0.15-1.0 MPa (1.5 MPa / 215 psi proof) across -20 to +70 C. Stroke is 15 mm with a +1.0/0 tolerance. Mounting uses the through holes or the tapped holes at both ends, sensor grooves sit on two sides of the body, lubrication is not required, and this code is supplied without magnet.
| Order code | TWQ32X15KF |
|---|---|
| Product | Fixed mounting height Stopper Cylinder |
| Stroke | 15 mm |
| Stopper | Lever roller, adjustable oil cushion, self-lock |
| Magnet | No magnet |
| Action | Double acting |
|---|---|
| Mounting | Through holes, tapped both ends |
| Bore | Ø32 mm |
| Strokes | 10, 15, 20 mm (+1.0/0) |
| Port | PT1/8 |
| Stopper types | Round rod, Flat rod, Roller, Lever roller, adjustable oil cushion |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15-1.0 MPa |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to +70 °C |
| Cushion | Bumper |
| Lubrication | Not required |
Source: AirTAC Products Catalog 2026A (PDF01-P0760..P0761), TWQ series specifications and ordering code.
TWQ32X15KF is the version to specify when stop position must be held firmly: the F self-lock is available only on the lever roller stopper, so it always pairs with the K head and its adjustable oil cushion. Choose plain TWQ32X15K if a springing lever is harmless in your layout, or TWQ32X15R, B or C for lighter-duty rolling or rigid contact. All TWQ32X15 variants keep the same 15 mm stroke; the X10 and X20 codes change only the lift. None of these codes include the S magnet option.
The F self-lock prevents the lever roller from kicking the load back downhill once it has been stopped, keeping the pallet in place until air lowers it.
The adjustable oil shock absorber eases each carton to a halt and the self-lock holds it steady for case sealing or labelling on the Dia 32 double acting body.
Rows of TWQ32X15KF units catch and hold totes one after another, running on 0.15-1.0 MPa air through PT1/8 ports with no lubrication needed.
Dia 32 mm bore, double acting, 15 mm stroke (+1.0/0 tolerance), lever roller stopper with adjustable oil shock absorber and F self-lock, PT1/8 port, 0.15-1.0 MPa operating pressure, 1.5 MPa (215 psi) proof pressure, -20 to +70 C, bumper cushion, no lubrication required, through-hole or both-ends tapped mounting, no magnet fitted.
F adds the self-lock function, offered only with the lever roller stopper. It stops the lever from springing back and pushing the stopped load backwards after impact. Without F, as on TWQ32X15K, the same cushioned lever roller is fitted but the load is not held against lever rebound.