verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC TWQ32 · Fixed mounting height Stopper Cylinder

Airtac TWQ Stopper Cylinder TWQ32X15SC

Genuine AirTAC fixed mounting height stopper cylinder, order code TWQ32X15SC from the TWQ32 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.

  • Stroke15 mm
  • StopperRound rod
  • MagnetMagnet
  • ActionDouble acting
  • MountingThrough holes, tapped both ends
  • BoreØ32 mm
$49.28 $56.78Save 13%
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every TWQ32 stroke, stopper and magnet on one page All TWQ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac TWQ Stopper Cylinder TWQ32X15SC

The TWQ32X15SC combines the C round rod stopper head with the S piston magnet on AirTAC's Dia 32 mm fixed mounting height stopper body, trimmed to a 15 mm stroke with a +1.0/0 mm tolerance. Being double acting, air raises the stopper for stopping and lowers it to release, and the thicker piston rod is designed to carry the impact of workpieces arriving on the line.

Because the magnet rides the piston, switches seated in the sensor grooves on the two sides of the body can report stopper position to your control system; confirm the matching switch from the datasheet. The round rod head is the simplest contact in the TWQ range, and the cylinder takes PT1/8 air filtered by a 40 um element, runs at 0.15 to 1.0 MPa, withstands 1.5 MPa (215 psi) proof pressure, works from -20 to +70 C, cushions with a bumper and needs no lubrication, following JIS standards.

Airtac TWQ Stopper Cylinder TWQ32X15SC Technical Specifications

Order codeTWQ32X15SC
ProductFixed mounting height Stopper Cylinder
Stroke15 mm
StopperRound rod
MagnetMagnet
ActionDouble acting
MountingThrough holes, tapped both ends
BoreØ32 mm
Strokes10, 15, 20 mm (+1.0/0)
PortPT1/8
Stopper typesRound rod, Flat rod, Roller, Lever roller, adjustable oil cushion
FluidAir (filtered by 40 µm element)
Operating pressure0.15-1.0 MPa
Proof pressure1.5 MPa (215 psi)
Temperature-20 to +70 °C
CushionBumper
LubricationNot required

Source: AirTAC Products Catalog 2026A (PDF01-P0760..P0761), TWQ series specifications and ordering code.

How to choose

Pick TWQ32X15SC for a round rod stopper with position feedback at 15 mm stroke. Its closest siblings: TWQ32X15C is the identical round rod stopper but ships without a magnet, TWQ32X15SB keeps the magnet and widens the contact to a flat rod, and TWQ32X15R removes both magnet and fixed face in favour of a roller. Where impact demands a soft landing, the lever roller TWQ32X15K with adjustable oil cushion, plus F for self-lock, is the upgrade path.

Applications

conveyor_belt

Accumulation conveyor stops

The fixed mounting height sets the round rod face against moving pallets, while the 15 mm stroke lifts it clear to release the queue.

widgets

Tote diversion points

Magnetic position feedback from the body's two sensor grooves confirms the stopper is down before a diverter pushes totes into the side lane.

settings

Gate before a lift or station

Double acting control and the Dia 32 mm bore let the round rod gate workpieces ahead of a lift or machining station, with the bumper cushion softening each stop.

FAQ

Give me the TWQ32X15SC key figures in one place.

Dia 32 mm bore; 15 mm stroke (+1.0/0 mm); round rod stopper head; magnet fitted; double acting; PT1/8 port; 0.15 to 1.0 MPa operating pressure, 1.5 MPa (215 psi) proof pressure; -20 to +70 C; bumper cushion; 40 um filtered air; no lubrication required.

How does the round rod head differ from the other TWQ32 stopper options?

Within the 15 mm stroke family, C selects a round rod, B a flat rod, R a roller, and K a lever roller with adjustable oil cushion. The round rod is the basic fixed contact face; pick B for a wider face, R for a rolling face, and K when impact energy calls for the oil cushion.