
Genuine AirTAC fixed mounting height stopper cylinder, order code TWQ32X15SK from the TWQ32 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
The AirTAC TWQ32X15SK is a fixed mounting height stopper cylinder with a Dia 32 mm bore and 15 mm stroke (tolerance +1.0/0 mm). Double acting air raises and lowers the stopper, and the K option fits the lever roller head with an adjustable oil shock absorber, the softest stop available in the TWQ32 range. The thicker piston rod resists impact, the port is PT1/8, and operating pressure runs 0.15 to 1.0 MPa.
The S suffix adds a magnet to the piston, so switches can sit in the sensor grooves machined on two sides of the body and report the stopper's up and down positions to the controller. Mount through the body holes or the tapped holes at both ends, and run it on air filtered by a 40 um element; lubrication is not required.
| Order code | TWQ32X15SK |
|---|---|
| Product | Fixed mounting height Stopper Cylinder |
| Stroke | 15 mm |
| Stopper | Lever roller, adjustable oil cushion |
| Magnet | Magnet |
| Action | Double acting |
|---|---|
| Mounting | Through holes, tapped both ends |
| Bore | Ø32 mm |
| Strokes | 10, 15, 20 mm (+1.0/0) |
| Port | PT1/8 |
| Stopper types | Round rod, Flat rod, Roller, Lever roller, adjustable oil cushion |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15-1.0 MPa |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to +70 °C |
| Cushion | Bumper |
| Lubrication | Not required |
Source: AirTAC Products Catalog 2026A (PDF01-P0760..P0761), TWQ series specifications and ordering code.
Within the TWQ32 ordering table, this K code carries the lever roller and adjustable oil cushion, while TWQ32X15SR uses a plain roller, TWQ32X15SB a flat rod and TWQ32X15SC a round rod. Pick the SK when pallets need a damped landing at 15 mm stroke; add F (TWQ32X15SKF) if lever spring-back could push the load backwards. Strokes X10 and X20 are the neighbouring alternatives if your stop height differs.
The piston magnet works with the two-sided sensor grooves, so switches can confirm the stopper is down before the conveyor is allowed to restart.
The adjustable oil cushion eases fixtures to rest at the 15 mm stop height, so machined parts do not bounce when they arrive at the gate.
The lever roller rolls under leading boxes and the oil shock absorber takes up push-in force while the upstream line keeps running.
Dia 32 mm bore, 15 mm stroke (+1.0/0 mm), double acting, PT1/8 port, operating pressure 0.15 to 1.0 MPa, proof pressure 1.5 MPa (215 psi), temperature -20 to +70 C, bumper cushion, lever roller stopper with adjustable oil cushion, magnet fitted, air filtered by a 40 um element.
K is the lever roller head with an adjustable oil shock absorber, so the stopped load lands softer than on the C round rod, B flat rod or R roller versions. It is also the only stopper that can take the F self-lock option, which this code does not include.