
Genuine AirTAC fixed mounting height stopper cylinder, order code TWQ32X15SR from the TWQ32 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
With the R stopper option, this AirTAC TWQ32 ends in a free roller rather than a fixed rod, so contact with the moving workpiece is rolling instead of sliding, kinder to cartons, labels and painted surfaces. The cylinder keeps the series' Dia 32 mm bore, 15 mm stroke (tolerance +1.0/0), double acting action and PT1/8 port, with 0.15 to 1.0 MPa operating pressure and a bumper cushion.
The S magnet suits stop positions that must be confirmed: switches ride in the grooves machined on two sides of the body and feed the stopper's up and down states to the control system. Mount through the body holes or the tapped holes at both ends, run on air filtered by a 40 um element, and expect no lubrication across the -20 to +70 C range.
| Order code | TWQ32X15SR |
|---|---|
| Product | Fixed mounting height Stopper Cylinder |
| Stroke | 15 mm |
| Stopper | Roller |
| Magnet | Magnet |
| Action | Double acting |
|---|---|
| Mounting | Through holes, tapped both ends |
| Bore | Ø32 mm |
| Strokes | 10, 15, 20 mm (+1.0/0) |
| Port | PT1/8 |
| Stopper types | Round rod, Flat rod, Roller, Lever roller, adjustable oil cushion |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15-1.0 MPa |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to +70 °C |
| Cushion | Bumper |
| Lubrication | Not required |
Source: AirTAC Products Catalog 2026A (PDF01-P0760..P0761), TWQ series specifications and ordering code.
Compared with TWQ32X15SK and TWQ32X15SKF, the SR drops the lever and the adjustable oil cushion in favour of a plain roller, so it suits loads that roll against the stop rather than ram it. TWQ32X15SC round rod and TWQ32X15SB flat rod give fixed contact faces, while the X10 and X20 stroke codes cover other stop heights in the same Dia 32 bore.
Boxes roll to rest against the roller head without scuffing printed faces, and the magnet lets switches confirm the stopper position.
The two-sided sensor grooves with the piston magnet verify the stopper is up or down before a diverter releases the next parcel.
The roller spins with the moving product, cutting wear on both the stopper head and the product base at each stop cycle.
Dia 32 mm bore, 15 mm stroke (+1.0/0 mm), double acting, PT1/8 port, operating pressure 0.15 to 1.0 MPa, proof pressure 1.5 MPa (215 psi), temperature -20 to +70 C, bumper cushion, roller stopper, magnet fitted, air filtered by a 40 um element.
R replaces the rod end with a roller, so products rolling into the stopper turn the roller instead of dragging across a fixed rod. Unlike the K code there is no lever or adjustable oil cushion, and the F self-lock is not offered with R; the magnet, PT1/8 port, Dia 32 bore and 15 mm stroke remain as coded.