
Genuine AirTAC fixed mounting height stopper cylinder, order code TWQ32X20K from the TWQ32 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
TWQ32X20K gives the 32 mm TWQ32 stopper cylinder its softest standard stop. The K option replaces the plain rod with a lever roller fitted with an adjustable oil shock absorber, so a fast pallet or box is decelerated across the 20 mm stroke instead of hitting a hard bumper. Double acting air raises and lowers the lever.
The 20 mm stroke is the longest offered on this bore, with 10 and 15 mm as the alternatives, and the fixed mounting height keeps every stop on the line level. Feed it filtered air through the PT1/8 port at 0.15-1.0 MPa with no lubrication required. This order code leaves the S magnet off, and the F self-lock is not included either.
| Order code | TWQ32X20K |
|---|---|
| Product | Fixed mounting height Stopper Cylinder |
| Stroke | 20 mm |
| Stopper | Lever roller, adjustable oil cushion |
| Magnet | No magnet |
| Action | Double acting |
|---|---|
| Mounting | Through holes, tapped both ends |
| Bore | Ø32 mm |
| Strokes | 10, 15, 20 mm (+1.0/0) |
| Port | PT1/8 |
| Stopper types | Round rod, Flat rod, Roller, Lever roller, adjustable oil cushion |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15-1.0 MPa |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to +70 °C |
| Cushion | Bumper |
| Lubrication | Not required |
Source: AirTAC Products Catalog 2026A (PDF01-P0760..P0761), TWQ series specifications and ordering code.
Compared with TWQ32X20C, TWQ32X20B and TWQ32X20R, which stop loads on a round rod, flat rod or hard roller, pick the K code when impact must be absorbed, because only K carries the adjustable oil cushion on the lever roller.
If the stopped load tends to push the lever backwards, move up to TWQ32X20KF, which adds the F self-lock to the same lever roller. For shorter stops on the same cushioned lever, the K option also exists on the 10 mm and 15 mm strokes.
Absorb a fast pallet at a transfer point so the lever roller and oil cushion take the impact before the conveyor structure does.
Queue cartons in accumulating lanes where the roller contact lets moving product roll down to a controlled, cushioned halt.
Adjust the oil cushion to match stop softness to product weight and line speed, useful on mixed-load conveyor runs.
It specifies the lever roller stopper with an adjustable oil shock absorber. The lever rolls the load to a halt while the oil cushion bleeds off impact energy, a softer stop than the C round rod, B flat rod or R roller versions, which close on the standard bumper.
Dia 32 mm bore, 20 mm stroke with +1.0/0 mm tolerance, double acting, PT1/8 port, 0.15-1.0 MPa working pressure with 1.5 MPa (215 psi) proof pressure, -20 to +70 C, air filtered by a 40 um element, no magnet and no self-lock. Confirm lever dimensions from the datasheet.