
Genuine AirTAC fixed mounting height stopper cylinder, order code TWQ32X20R from the TWQ32 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
The TWQ32X20R is the roller-head version of the AirTAC TWQ32 fixed-height stopper cylinder, ordered with a 20 mm stroke on the Dia 32 mm bore. Because the stopper is a roller, a pallet or cart wheel can roll over the head and settle against it instead of scraping across a fixed rod, which reduces wear on both the load and the stopper. The cylinder is double acting, so compressed air both raises and lowers the stopper through the PT1/8 ports within the 0.15-1.0 MPa working range.
This order code has no magnet, so it will not switch a position sensor even though the TWQ32 body carries sensor grooves on two sides. The unit follows JIS standards, needs no lubrication, uses a bumper cushion, and its thicker piston rod is built to take repeated impact from stopping moving loads.
| Order code | TWQ32X20R |
|---|---|
| Product | Fixed mounting height Stopper Cylinder |
| Stroke | 20 mm |
| Stopper | Roller |
| Magnet | No magnet |
| Action | Double acting |
|---|---|
| Mounting | Through holes, tapped both ends |
| Bore | Ø32 mm |
| Strokes | 10, 15, 20 mm (+1.0/0) |
| Port | PT1/8 |
| Stopper types | Round rod, Flat rod, Roller, Lever roller, adjustable oil cushion |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15-1.0 MPa |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to +70 °C |
| Cushion | Bumper |
| Lubrication | Not required |
Source: AirTAC Products Catalog 2026A (PDF01-P0760..P0761), TWQ series specifications and ordering code.
Within the TWQ32 stopper table, R is the roller: pick it when loads arrive on wheels or rollers and you want them to roll onto the stop rather than drag. Choose C for a plain round rod, B for a flat rod face, or K when you need the lever roller with adjustable oil cushion and the optional F self-lock. If your PLC must confirm the stopper position, order the S variant instead, since this code ships without the magnet.
The roller head lets pallet wheels roll up against the stopper on accumulation lines, then air lowers it to release the load.
Pick carts on wheeled trolleys can be held and released one by one, with the 20 mm lift clearing the passing wheels.
The Dia 32 mm piston and thick rod absorb impact at transfer stations where forklift-fed loads arrive fast on roller lanes.
Dia 32 mm bore, 20 mm stroke (tolerance +1.0/0 mm), double acting, roller stopper, PT1/8 ports, 0.15-1.0 MPa operating pressure, 1.5 MPa (215 psi) proof pressure, bumper cushion, -20 to +70 C, no magnet fitted.
The body has sensor grooves on two sides, but this code carries no magnet, so a switch will not trigger on it. If sensing is required, specify the magnet option (S) in the order code when you buy.