
Genuine AirTAC fixed mounting height stopper cylinder, order code TWQ32X20SB from the TWQ32 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
TWQ32X20SB orders the AirTAC TWQ32 stopper cylinder with the B option, a flat rod that presents a wider, flat face to the incoming box or tote. That flat face keeps square-sided loads from pivoting around a narrow contact point, which is why B is a common pick for cartons and totes on belt conveyors. The unit is double acting with a 20 mm stroke on the Dia 32 mm bore, fed through PT1/8 ports at 0.15-1.0 MPa.
The S in this code means the piston carries a magnet, so reed or hall-effect switches seated in the body grooves on either side can signal end positions back to the controller. Like all TWQ32 cylinders it is JIS standard, runs dry with no lubrication, uses a bumper cushion, and its robust piston rod is sized to resist stopper impact.
| Order code | TWQ32X20SB |
|---|---|
| Product | Fixed mounting height Stopper Cylinder |
| Stroke | 20 mm |
| Stopper | Flat rod |
| Magnet | Magnet |
| Action | Double acting |
|---|---|
| Mounting | Through holes, tapped both ends |
| Bore | Ø32 mm |
| Strokes | 10, 15, 20 mm (+1.0/0) |
| Port | PT1/8 |
| Stopper types | Round rod, Flat rod, Roller, Lever roller, adjustable oil cushion |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15-1.0 MPa |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to +70 °C |
| Cushion | Bumper |
| Lubrication | Not required |
Source: AirTAC Products Catalog 2026A (PDF01-P0760..P0761), TWQ series specifications and ordering code.
Compare S-coded TWQ32 stops: SB gives you the flat rod face plus magnet, SC keeps the magnet but uses a round rod, while TWQ32X20R is a magnet-free roller for wheeled loads. If soft deceleration matters more than a flat face, step up to K (lever roller with adjustable oil cushion) and add F for the self-lock lever that keeps the stopped load from pushing the lever back.
The flat rod face squares up cartons before a divert or transfer, and the magnet lets the PLC verify the stop is down.
Plastic totes stack against the wide flat face in buffer sections, releasing one at a time on a 20 mm lift command.
The built-in magnet drives switches in the side grooves, giving the controller a confirmed up or down signal at each station.
Dia 32 mm bore, 20 mm stroke (tolerance +1.0/0 mm), double acting, flat rod (B) stopper with magnet (S), PT1/8 ports, 0.15-1.0 MPa pressure range, 1.5 MPa (215 psi) proof pressure, -20 to +70 C, bumper cushion.
The B option gives a flat face that supports square loads like cartons and totes across a wider contact area, while the C round rod suits simpler nose-on stops. Both are available in the same Dia 32 mm, 20 mm stroke envelope, so the choice is about load shape, not sizing.