
Genuine AirTAC fixed mounting height stopper cylinder, order code TWQ32X20SC from the TWQ32 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
TWQ32X20SC is the standard round-rod configuration of the AirTAC TWQ32 stopper cylinder, specified with a 20 mm stroke on the Dia 32 mm double-acting body. The C option leaves the rod end as a plain round rod, the simplest stopper form for nose-stopping crates, boxes and workpieces that arrive centrally against it. Air on both sides of the piston raises and lowers the stop through PT1/8 ports across the 0.15-1.0 MPa range.
With the S option this piston is magnetized, so position switches clipped into the grooves milled on the two body sides can report the stopper state. The series meets JIS standards, needs no lubrication, cushions with a bumper, operates from -20 to +70 C on 40 um-filtered air, and its heavier rod section is designed to withstand impact loads.
| Order code | TWQ32X20SC |
|---|---|
| Product | Fixed mounting height Stopper Cylinder |
| Stroke | 20 mm |
| Stopper | Round rod |
| Magnet | Magnet |
| Action | Double acting |
|---|---|
| Mounting | Through holes, tapped both ends |
| Bore | Ø32 mm |
| Strokes | 10, 15, 20 mm (+1.0/0) |
| Port | PT1/8 |
| Stopper types | Round rod, Flat rod, Roller, Lever roller, adjustable oil cushion |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15-1.0 MPa |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to +70 °C |
| Cushion | Bumper |
| Lubrication | Not required |
Source: AirTAC Products Catalog 2026A (PDF01-P0760..P0761), TWQ series specifications and ordering code.
SC keeps things simple: round rod plus magnet on the 20 mm Dia 32 body. Drop the S if no sensing is needed (code TWQ32X20C), take SB when a flat contact face suits square cartons, or R for a roller that wheels can ride onto. For loads arriving hard and fast, K adds the lever roller with adjustable oil shock absorber, and F locks that lever against spring-back.
The round rod noses parts into a fixed fixture position, with the magnet confirming the stop is raised before the cycle starts.
A 20 mm air lift drops the rod below load height to release crates one by one along a synchronized conveyor run.
Sensor switches in the side grooves read the magnet, letting the cell controller sequence stops against a Dia 32 mm impact-rated body.
TWQ32 is the Dia 32 mm double-acting stopper cylinder, X20 is the 20 mm stroke (tolerance +1.0/0 mm), S adds the position-sensing magnet, and C selects the round rod stopper. Ports are PT1/8; operating pressure is 0.15-1.0 MPa with 1.5 MPa (215 psi) proof pressure.
For wheeled loads use R (roller), for square cartons use B (flat rod face), and for harsh impacts use K, the lever roller with adjustable oil cushion, optionally with F self-lock. Each swaps only the rod end, so bore, stroke and sensing stay the same as this code.