
Genuine AirTAC fixed mounting height stopper cylinder, order code TWQ50X20C from the TWQ50 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
The AirTAC TWQ50X20C is a fixed mounting height stopper cylinder with a Dia 50 mm bore and a 20 mm stroke (tolerance +1.0/0 mm), fitted with the C round rod stopper. It is double acting, so air both raises the rod to stop the load and lowers it to release, and the bumper cushion plus the thicker piston rod help it take conveyor impact. Air ports are PT1/8 and mounting uses the through holes or the tapped holes at both ends.
It runs on filtered air at 0.15-1.0 MPa, needs no lubrication and follows JIS standards, with sensor grooves machined on two sides of the body. This code carries no magnet, so no built-in switching signal is present; order an S-suffixed code if your line needs position sensing.
| Order code | TWQ50X20C |
|---|---|
| Product | Fixed mounting height Stopper Cylinder |
| Stroke | 20 mm |
| Stopper | Round rod |
| Magnet | No magnet |
| Action | Double acting |
|---|---|
| Mounting | Through holes, tapped both ends |
| Bore | Ø50 mm |
| Strokes | 20, 25, 30 mm (+1.0/0) |
| Port | PT1/8 |
| Stopper types | Round rod, Flat rod, Roller, Lever roller, adjustable oil cushion |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15-1.0 MPa |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to +70 °C |
| Cushion | Bumper |
| Lubrication | Not required |
Source: AirTAC Products Catalog 2026A (PDF01-P0760..P0761), TWQ series specifications and ordering code.
In the TWQ50 ordering table the stopper letter sets the rod end: C is the plain round rod, B the flat rod, R the roller and K the lever roller with adjustable oil cushion. Pick TWQ50X20C when workpieces can butt squarely against a simple rigid rod; step up to K or KF when the stop must be cushioned. Strokes on the Dia 50 bore are 20, 25 and 30 mm, so the X20 is the shortest travel and suits shallow lift above the conveyor rail.
The round rod raises into the path of oncoming pallets at a fixed mounting height, and the 20 mm stroke keeps the lift compact above the rail.
Double acting control lowers the rod to release accumulated totes lane by lane in sortation and staging areas.
Size the Dia 50 bore with the catalog impact load and speed charts to get a rigid round-rod stop for fixtures and assembly stations.
Dia 50 mm bore, 20 mm stroke (+1.0/0 mm), C round rod stopper, double acting, PT1/8 port, operating pressure 0.15-1.0 MPa, proof pressure 1.5 MPa (215 psi), bumper cushion, temperature -20 to +70 C, no magnet, no lubrication required, through-hole or both-ends tapped mounting.
The S option in the ordering code adds the magnet for position sensors; TWQ50X20C ships without it. Rod ends are chosen by letter in the same code: C round rod, B flat rod, R roller, K lever roller with adjustable oil cushion.