
Genuine AirTAC fixed mounting height stopper cylinder, order code TWQ50X20K from the TWQ50 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
The TWQ50X20K carries the K stopper: a lever roller combined with an adjustable oil cushion, so arriving loads are decelerated more gently than against the rigid C round rod. The Dia 50 mm bore and 20 mm stroke (tolerance +1.0/0 mm) keep the fixed-height body compact, and it mounts through holes or the tapped holes at both ends with PT1/8 air ports.
It is double acting, meaning air raises the lever roller for stopping and lowers it to release the line. The operating range is 0.15-1.0 MPa of filtered air with a 1.5 MPa (215 psi) proof pressure, the bumper design absorbs residual shock, and no lubrication is needed. This code has no magnet; the KF sibling adds the self-lock to the same lever roller.
| Order code | TWQ50X20K |
|---|---|
| Product | Fixed mounting height Stopper Cylinder |
| Stroke | 20 mm |
| Stopper | Lever roller, adjustable oil cushion |
| Magnet | No magnet |
| Action | Double acting |
|---|---|
| Mounting | Through holes, tapped both ends |
| Bore | Ø50 mm |
| Strokes | 20, 25, 30 mm (+1.0/0) |
| Port | PT1/8 |
| Stopper types | Round rod, Flat rod, Roller, Lever roller, adjustable oil cushion |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15-1.0 MPa |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to +70 °C |
| Cushion | Bumper |
| Lubrication | Not required |
Source: AirTAC Products Catalog 2026A (PDF01-P0760..P0761), TWQ series specifications and ordering code.
In the TWQ50 code table the stopper letters run C round rod, B flat rod, R roller and K lever roller. K is the cushioned choice: the adjustable oil shock absorber takes impacts that a C round rod would absorb rigidly. If the stopped load must not push the lever back after contact, move to TWQ50X20KF, which appends the F self-lock to this identical lever-roller stopper.
The lever roller rolls into contact with the pallet face while the oil cushion decelerates it, protecting both load and cylinder at the end of a powered line.
Rolling lever contact reduces scuffing on cartons and shrink-wrapped packs compared with a hard rod stop.
Air lowers the lever to release workpieces downstream; the adjustable cushion lets you match deceleration to line speed using the catalog impact charts.
Dia 50 mm bore, 20 mm stroke (+1.0/0 mm), K lever roller stopper with adjustable oil cushion, double acting, PT1/8 port, operating pressure 0.15-1.0 MPa, proof pressure 1.5 MPa (215 psi), bumper cushion, temperature -20 to +70 C, no magnet, no lubrication required.
TWQ50X20K and TWQ50X20KF share the same lever roller and adjustable oil cushion; KF only adds the F self-lock, which stops the lever from springing back and pushing the stopped load backwards. Choose plain K where the line is flat and nothing shoves the load against the stopper.