verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC TWQ50 · Fixed mounting height Stopper Cylinder

Airtac TWQ Stopper Cylinder TWQ50X20KF

Genuine AirTAC fixed mounting height stopper cylinder, order code TWQ50X20KF from the TWQ50 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.

  • Stroke20 mm
  • StopperLever roller, adjustable oil cushion, self-lock
  • MagnetNo magnet
  • ActionDouble acting
  • MountingThrough holes, tapped both ends
  • BoreØ50 mm
$119.07 $126.57Save 5%
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every TWQ50 stroke, stopper and magnet on one page All TWQ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac TWQ Stopper Cylinder TWQ50X20KF

TWQ50X20KF is the K lever roller stopper with the F self-lock added in the ordering code. When a load presses against the stopper, the lock stops the lever from springing back and pushing the stopped load backwards, while the adjustable oil cushion still softens the arrival. The Dia 50 mm bore, 20 mm stroke and fixed mounting height body mount through holes or the tapped holes at both ends, with PT1/8 ports.

The cylinder is double acting: air raises and lowers the stopper. It operates on 0.15-1.0 MPa of filtered air with 1.5 MPa (215 psi) proof pressure across -20 to +70 C, needs no lubrication and follows JIS standards. Sensor grooves sit on two sides of the body; this code has no magnet, so order an S-suffixed code if position switching is needed.

Airtac TWQ Stopper Cylinder TWQ50X20KF Technical Specifications

Order codeTWQ50X20KF
ProductFixed mounting height Stopper Cylinder
Stroke20 mm
StopperLever roller, adjustable oil cushion, self-lock
MagnetNo magnet
ActionDouble acting
MountingThrough holes, tapped both ends
BoreØ50 mm
Strokes20, 25, 30 mm (+1.0/0)
PortPT1/8
Stopper typesRound rod, Flat rod, Roller, Lever roller, adjustable oil cushion
FluidAir (filtered by 40 µm element)
Operating pressure0.15-1.0 MPa
Proof pressure1.5 MPa (215 psi)
Temperature-20 to +70 °C
CushionBumper
LubricationNot required

Source: AirTAC Products Catalog 2026A (PDF01-P0760..P0761), TWQ series specifications and ordering code.

How to choose

TWQ50X20KF is read from the ordering table as bore 50, stroke 20, K lever roller with adjustable oil cushion, plus F self-lock. The plain TWQ50X20K offers the same cushioned stopper without the lock, and C round rod or R roller codes are rigid alternatives. Choose KF whenever line slope, gravity or downstream push could shove the stopped workpiece backwards against the lever.

Applications

conveyor_belt

Accumulating and sloped conveyor stops

The self-lock holds the lever against roll-back where gravity or line pitch presses pallets into the stopper.

warehouse

Heavy load holding at staging stops

The oil cushion absorbs the arrival and the lock keeps the stopped load in position until you lower the rod to release it.

tune

Indexed release points

Combine the locked holding position with double acting lowering to release workpieces one station at a time on an assembly line.

FAQ

What are the key figures of the TWQ50X20KF?

Dia 50 mm bore, 20 mm stroke (+1.0/0 mm), K lever roller stopper with adjustable oil cushion plus F self-lock, double acting, PT1/8 port, operating pressure 0.15-1.0 MPa, proof pressure 1.5 MPa (215 psi), bumper cushion, temperature -20 to +70 C, no magnet, no lubrication required.

When is the F self-lock worth specifying?

Specify it when the stopped load can push the lever backwards, for example on sloped or accumulating conveyors. The F option stops the lever from springing back and pushing the load backwards; without it, order TWQ50X20K for the same cushioned lever roller.