verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC TWQ50 · Fixed mounting height Stopper Cylinder

Airtac TWQ Stopper Cylinder TWQ50X20SC

Genuine AirTAC fixed mounting height stopper cylinder, order code TWQ50X20SC from the TWQ50 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.

  • Stroke20 mm
  • StopperRound rod
  • MagnetMagnet
  • ActionDouble acting
  • MountingThrough holes, tapped both ends
  • BoreØ50 mm
$67.69 $75.19Save 9%
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every TWQ50 stroke, stopper and magnet on one page All TWQ50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac TWQ Stopper Cylinder TWQ50X20SC

The TWQ50X20SC is the round rod stopper code of the Dia 50 mm TWQ series with the S magnet included, so the sensor grooves on two sides of the body can host position switches that report the raised and lowered states. The cylinder is double acting, the thicker piston rod is designed to resist impact better, and the bumper cushion rounds off each stop of the 20 mm stroke.

It mounts by through holes or the tapped holes at both ends, plumbs through PT1/8 ports, and operates on air filtered by a 40 um element from 0.15 to 1.0 MPa with 1.5 MPa (215 psi) proof pressure. Lubrication is not required, temperature spans -20 to +70 C, and the series follows JIS standards.

Airtac TWQ Stopper Cylinder TWQ50X20SC Technical Specifications

Order codeTWQ50X20SC
ProductFixed mounting height Stopper Cylinder
Stroke20 mm
StopperRound rod
MagnetMagnet
ActionDouble acting
MountingThrough holes, tapped both ends
BoreØ50 mm
Strokes20, 25, 30 mm (+1.0/0)
PortPT1/8
Stopper typesRound rod, Flat rod, Roller, Lever roller, adjustable oil cushion
FluidAir (filtered by 40 µm element)
Operating pressure0.15-1.0 MPa
Proof pressure1.5 MPa (215 psi)
Temperature-20 to +70 °C
CushionBumper
LubricationNot required

Source: AirTAC Products Catalog 2026A (PDF01-P0760..P0761), TWQ series specifications and ordering code.

How to choose

TWQ50X20SC suits lines that want a slim, fixed round stop face plus built-in position feedback. Compare the TWQ50X20SB flat rod when a broader stop face is preferred, the TWQ50X20R roller when a rolling face is wanted but the magnet can be dropped, and the TWQ50X20K lever roller with adjustable oil cushion for the softest catch; F can be appended to that lever to prevent spring-back of the stopped load.

Without the magnet the plain round rod code is TWQ50X20C, and for more lift height the sibling strokes are TWQ50X25SC and TWQ50X30SC.

Applications

pan_tool

Single workpiece stop

The round rod head presents a slim stop point for individual workpieces on an indexing conveyor, with double acting air raising and lowering between cycles.

conveyor_belt

Flow line pallet halt

Pallets halt against the rod while switches reading the body sensor grooves confirm stopper position for the line controller.

settings

Machine-mounted stop fixture

Mount through holes or tapped both ends, plumb PT1/8, and run 0.15-1.0 MPa air with the bumper cushion absorbing each impact.

FAQ

What are the key figures of the TWQ50X20SC?

Dia 50 mm bore, 20 mm stroke (tolerance +1.0/0 mm), double acting, round rod stopper with magnet, PT1/8 port, operating pressure 0.15-1.0 MPa, proof pressure 1.5 MPa (215 psi), temperature -20 to +70 C, bumper cushion, sensor grooves on two body sides, no lubrication required.

When should I pick the round rod over the roller or lever roller?

The C round rod gives a fixed, slim stop face and, with the S magnet in this code, allows switch feedback via the body grooves. The R roller offers a rolling face but without a magnet in that code, and the K lever roller with adjustable oil shock absorber gives a softer stop, with optional F self-lock to stop the lever pushing the load backwards.