The AirTAC GFR300C08ALF1WTK AirTAC Filter Regulator NPT1/4 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR300 series is a filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This unit is built with 1/4 in NPT ports, a 5 um filter element (the finer of the two published grades), an automatic drain that discharges collected condensate without manual attention, and the low-pressure regulator type. It carries an embedded square gauge with an MPa scale, a reverse (check) valve, a mounting bracket, and a metal bowl. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. GFR300 is the 300 size within the GFR family, which spans 200, 300, 400 and 600 sizes with port options from 1/8 to 1 in and PT, G or NPT threads. Drain type, filter grade, gauge scale and check-valve options can be selected across the series. Because flow is published as curves rather than a single rating, we confirm the datasheet and sizing figures for your application on request.
| Model | GFR300C08ALF1WTK AirTAC Filter Regulator NPT1/4 |
|---|---|
| Series | GFR300 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · See datasheet · 40 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-C0 (two-unit set) |
Feeding filtered, regulated air to a CNC machining centre's pneumatic tool-clamp circuit, where the 5 um element protects clamping valves from particulate and the regulator holds a steady set pressure.
Supplying a packaging machine's valve island and cylinders: the automatic drain handles condensate at the drop point and the fitted check valve blocks reverse flow in the downstream line.
Regulating supply to a spray-painting booth or low-pressure applicator circuit where the low-pressure regulator type is the right fit; confirm the adjustment range with us before ordering.
Size the GFR300 by port and expected flow: the 300 size sits in the middle of the 200/300/400/600 range, and stepping up a size gives a larger port and more flow capacity - confirm the exact requirement against the published curves before ordering. Decodable choices on this unit: automatic drain (manual and differential-pressure types exist in the family), 5 um element versus the 40 um standard, low-pressure regulator type (its exact adjustment range is not published, so we confirm it on request), square gauge with MPa scale (psi and bar scales and an external round gauge are options), NPT thread where PT is the standard and G is also available, and a mounting bracket included. Flow is published as curves, not a single rated figure, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated figure, so we do not quote a number here. Send us your application details and we will confirm the flow and sizing figures from the datasheet on request.
The A in this code specifies an automatic drain, which discharges collected condensate without manual attention. The GFR family is also available with manual or differential-pressure drains - tell us which you prefer when ordering.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.