The AirTAC GFR300C08ALJC1T AirTAC Filter Regulator NPT1/4 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR300C08ALJC1T is a filter regulator: filtration and pressure regulation combined in one body, removing water and particulate from compressed air and holding a reduced downstream pressure. This configuration has 1/4 in NPT ports, an automatic drain that expels collected condensate from the metal bowl on its own, a 40 um standard filter element, the low-pressure regulator type, a fitted round gauge scaled in MPa, and no mounting bracket. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part from the GFR300 series, one of four sizes (200, 300, 400, 600) with port options from 1/8 to 1 in and thread options PT (standard), G and NPT. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet figures for your application.
| Model | GFR300C08ALJC1T AirTAC Filter Regulator NPT1/4 Low-Pressure |
|---|---|
| Series | GFR300 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · See datasheet · 40 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-C0 (two-unit set) |
Mounted at the point of use on assembly fixtures, this unit filters the shop air supply and holds a reduced, stable pressure for clamping cylinders that must not see full line pressure.
Installed on the air drop feeding a packaging machine, it removes water and pipe scale before the machine's valves and cylinders and lets the operator set the working pressure at the gauge.
Placed ahead of the spray guns on a finishing line, it strips water and particulate from the air stream and regulates pressure to the level the gun manufacturer specifies.
Within the GFR family you choose the size and port (200/300/400/600 with ports from 1/8 to 1 in) against the flow your line needs, the drain type (differential-pressure, automatic or manual), the filter grade (40 um standard or 5 um with code W), the gauge (embedded square standard or external round, scaled in MPa, psi or bar), the thread (PT standard; G and NPT to order) and whether a bracket is included. This unit is the 300 size with 1/4 in NPT ports, automatic drain, 40 um element, low-pressure regulator type, round MPa gauge and no bracket. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR flow as curves rather than a single rated figure, so we do not quote a number here. Tell us your line pressure, downstream demand and this unit's 1/4 in NPT port, and we will confirm the flow from the datasheet on request.
The A in the code fits an automatic drain, which expels collected condensate from the bowl without anyone opening it - useful on air drops that are not checked daily. The GFR family also offers manual and differential-pressure drains if your maintenance routine differs.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.