The AirTAC GFR300C08ALNT AirTAC Filter Regulator NPT1/4 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR300C08ALNT is a GFR-series filter regulator: water and particulate filtration plus pressure regulation combined in a single body, sized 300 with 1/4 in NPT ports. This configuration carries the standard 40 um filter element and an automatic drain, so collected condensate is expelled from the polycarbonate bowl without manual attention - useful on lines that run unattended. It is the low-pressure regulator type, supplied without a gauge, with the mounting bracket included. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, and options including manual or differential-pressure drains, a 5 um (W) filter grade, gauge styles and scales, G or NPT threads, and standard or low-pressure regulation. Flow is published as curves rather than a single rating, so ask us to confirm sizing figures and the datasheet for your application before ordering.
| Model | GFR300C08ALNT AirTAC Filter Regulator NPT1/4 Low-Pressure |
|---|---|
| Series | GFR300 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · See datasheet · 40 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-C0 (two-unit set) |
Filtering and regulating the low-pressure air that actuates sealing jaws and clamp cylinders on a bagging or wrapping line, with the automatic drain keeping condensate out of the valve stack.
Conditioning the 1/4 in air feed to gripper and suction-circuit regulators on a robotic handling cell, where clean, moisture-free air at a stable low setting protects the end effector.
Supplying filtered, regulated air to low-pressure jet and tensioning devices on spinning or weaving machines, with the bracket-mounted unit plumbed directly into the machine's 1/4 in drop.
Choose the size and port step against the air consumption of the circuit: this unit is size 300 with 1/4 in NPT ports; larger sizes (400, 600) carry larger ports and more flow, smaller sizes (200) less. Drain type is a real choice: automatic (this unit) suits unattended duty, manual suits periodic checks, and the differential-pressure default suits standard supply lines. Filter grade is 40 um standard here; specify the W code for 5 um where finer particulate removal matters. This is the low-pressure regulator type - confirm its setting range against your circuit before ordering. A gauge is not fitted (N code); gauge style and scale can be specified when ordering. Thread is NPT here; PT is the standard catalogue thread and G (BSPP) is also available. Bracket included on this code.
Flow for this family is published as curves, not a single rated figure, so send us your application details and we will confirm sizing from the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated figure, so we do not quote a number here. Send us your application details and we will confirm the sizing from the datasheet on request.
The A in the code specifies the automatic drain, which expels collected condensate from the bowl without manual intervention - a good fit for unattended lines. The N code specifies that no gauge is fitted; a gauge style and scale can be selected when ordering if you want to monitor the regulated pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.