The AirTAC GFR300C08C2GK AirTAC Filter Regulator G1/4 with Gauge is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR300 is a filter regulator: it removes water and particulate from compressed air and holds downstream pressure steady, all in one body. This GFR300C08C2GK is built on a G1/4 (1/4 in) port with G thread, carries the 40 um standard filter element, and drains condensate by differential pressure. A round gauge with a psi scale is fitted for direct setting, a reverse/check valve is fitted to hold the downstream side if the supply drops, and a mounting bracket is included. Maximum inlet pressure is 1.0 MPa (145 psi), the regulation range is 0.15-0.9 MPa (20-130 psi), and the operating temperature is -5 to 70 C (non-freezing). The bowl on this 300 size is polycarbonate.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, and can be ordered with automatic or manual drain, a 5 um element (code W), different gauge scales, G or NPT thread, and with or without the bracket and reverse valve. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application on request.
| Model | GFR300C08C2GK AirTAC Filter Regulator G1/4 with Gauge |
|---|---|
| Series | GFR300 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · See datasheet · 40 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-C0 (two-unit set) |
Filtered, regulated air feeding the clamping cylinders on a machining-cell fixture, where a steady downstream setting protects part hold-down through the cycle.
Point-of-use air preparation for the gripper and lift cylinders on a packaging conveyor, with the fitted check valve holding the downstream side if upstream air drops.
Water and particulate removal plus regulated pressure at the gun manifold in a spray booth, with the 40 um element and bowl sitting ahead of the coating equipment.
Choose the size by the port and flow step: 200, 300, 400 and 600 move up through 1/8 to 1 in ports, and this 300 sits at 1/4 in. Drain is a real choice - differential-pressure (this unit), automatic (code A) or manual (code M). The 40 um element is standard; specify W for 5 um where finer filtration is needed. On gauges, an embedded square gauge is standard and an external round gauge is optional, with MPa, psi or bar scales - this unit carries a round psi gauge. Thread is available as PT, G or NPT to order; the bracket can be included or omitted (code J), and K adds a reverse/check valve. Flow is published as curves, not a single rating, so send us your application and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR300 flow as curves rather than a single rated figure, so we do not quote one number. Tell us your inlet pressure and the flow your application needs, and we will confirm the sizing from the datasheet on request.
This unit drains by differential pressure, the standard arrangement. Code A gives an automatic drain and code M a manual drain; all three are catalogue choices on the same GFR300 body, and the manual-drain version carries the wider 0.05-0.9 MPa (7-130 psi) regulation range.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.