The AirTAC GFR300C15LJC2K AirTAC Filter Regulator PT1/2 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR300C15LJC2K is an AirTAC GFR300 filter regulator: a single body that removes water and particulate from compressed air and reduces pressure downstream. This unit is built on a 1/2 in PT1/2 port, is the low-pressure regulator type, filters to the standard 40 um grade, and carries the differential-pressure drain as its default condensate handling in a polycarbonate bowl. A round psi gauge is fitted, a reverse/check valve is built in, and the unit is supplied without a mounting bracket.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, plus drain, filter-grade, gauge, thread and bracket options. Maximum inlet pressure is 1.0 MPa (145 psi) and working temperature is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so ask us to confirm sizing and datasheet figures for your application.
| Model | GFR300C15LJC2K AirTAC Filter Regulator PT1/2 Low-Pressure |
|---|---|
| Series | GFR300 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · See datasheet · 40 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-C1 (two-unit set) |
Filtered, regulated air for the grip and lift cylinders on a bottling line, where the low-pressure type lets the circuit run at a reduced set point for gentle container handling.
Conditions and steps down supply air for the hold-down cylinders of a pneumatic press, with the built-in check valve helping hold downstream pressure if the main supply dips.
Feeds divert and stop cylinders on a packaging conveyor with clean, regulated air; the 40 um element keeps particulate and water out of the divert valves.
Choose the size by port and flow: this 300-size unit carries a 1/2 in PT1/2 port; larger sizes move more air, and G or NPT threads are order options if your piping is not PT. This configuration is the low-pressure regulator type, so pick it where the working set point sits well below full line pressure; the exact adjustment range for the low-pressure version is not published, and we confirm it on request. The 40 um element is the standard grade - order the W variant for 5 um filtration. Drain is the differential-pressure default, with automatic (A) and manual (M) variants available. The gauge is a round psi scale; embedded square gauges and MPa or bar scales are alternatives. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the G-series as curves rather than a single rated figure, so we do not quote a number here. Send us your application details and we will confirm the flow and sizing from the datasheet on request.
This unit uses the default differential-pressure drain, which handles condensate based on the pressure differential across the filter element. Automatic (code A) and manual (code M) drain variants are available to order if your installation needs them.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.