The AirTAC GFR300C15MC2WK AirTAC Filter Regulator PT1/2, 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR300C15MC2WK is a filter regulator: it removes water and particulate from compressed air and holds downstream pressure at your setpoint in a single body. This 300-size unit is tapped PT1/2 (1/2 in), carries a 5 um filter element, a manual drain bowl, a round gauge reading in psi and a built-in check valve, and includes a mounting bracket.
It is a genuine AirTAC part from the GFR300 series. Maximum inlet pressure is 1.0 MPa (145 psi), the regulator adjusts from 0.05 to 0.9 MPa (7-130 psi), and the operating temperature range is -5 to 70 C (non-freezing). Flow for this series is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application.
| Model | GFR300C15MC2WK AirTAC Filter Regulator PT1/2, 5 um |
|---|---|
| Series | GFR300 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · See datasheet · 40 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-C1 (two-unit set) |
Point-of-use conditioning for a pneumatic press: the 5 um element keeps sludge and scale out of the valve stack while the regulator holds a steady setpoint to the cylinders.
Conditioned, regulated air for pick-and-place and clamp actuators on a packaging conveyor, with the built-in check valve holding the setpoint if the upstream supply dips.
Clean, regulated air to spray guns in a finishing booth: the 5 um grade helps keep water and particles out of the finish, and the psi gauge makes setpoint checks quick.
Size and port step up together: 200, 300, 400 and 600 cover 1/8 in to 1 in ports, and this 300-size PT1/2 unit suits mid-range supply lines. The 5 um element (code W) gives finer filtration than the 40 um standard; the manual drain needs an operator to bleed the bowl, where automatic or differential-pressure drain versions work unattended. The round gauge on this unit reads in psi; an embedded square gauge with MPa, psi or bar scales is also available. PT thread is standard and G (BSPP) or NPT are order options, and a mounting bracket is included. Because flow is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for this series as curves, not a single rated figure, so we do not quote a number. Send us your application details and we will confirm the flow and datasheet figures on request.
The manual drain means an operator opens the bowl drain to remove collected water, which suits lines that are checked daily. If the unit is hard to reach or runs unattended, ask about the automatic or differential-pressure drain versions of the same filter regulator.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.