The AirTAC GFR300C15MF2WGK AirTAC Filter Regulator G1/2, 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR300C15MF2WGK is a size-300 filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in one body. This configuration is built with a G1/2 (BSPP) port, a 5 um filter element for finer filtration than the 40 um standard, a manual drain for controlled bowl evacuation, an embedded square gauge reading in psi, and a reverse/check valve fitted to hold downstream pressure. The standard regulator covers an adjustment range of 0.05-0.9 MPa (7-130 psi), with a maximum inlet pressure of 1.0 MPa (145 psi) and an operating temperature of -5 to 70 C (non-freezing).
This is a genuine AirTAC part from the GFR series, which spans sizes 200, 300, 400 and 600 with port sizes from 1/8 to 1 inch. Options across the range include differential-pressure, automatic or manual drains, 40 um or 5 um elements, gauge type and scale, G/NPT thread variants and bracket choices. Flow figures for this series are published as curves rather than a single rating, so we confirm the datasheet and sizing figures on request.
| Model | GFR300C15MF2WGK AirTAC Filter Regulator G1/2, 5 um |
|---|---|
| Series | GFR300 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · See datasheet · 40 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-C1 (two-unit set) |
Clean, regulated air for the pneumatic cylinders and grippers that drive case-packing and carton-sealing stations, with the 5 um element protecting directional valves from particulate carryover.
Point-of-use filtration and pressure setting at a spray or coating booth, where water and fine dirt in the supply line would otherwise mar the finish and destabilise gun pressure.
A single filter-regulator feeding a machine's pneumatic control manifold, with the check valve holding set pressure and the square psi gauge giving operators a local reading at the panel.
Choose the size step (200/300/400/600) and port against the flow your line needs - larger sizes carry larger ports and more flow, and we will confirm the curve figures for your application before you order. Drain type is a real decision here: this unit has a manual drain, which suits attended installations where an operator can bleed the bowl; automatic or differential-pressure drains suit unattended runs. The 5 um element in this model is the finer choice over the 40 um standard where downstream valves and instruments need cleaner air. Gauge type and scale (square embedded or optional external round, in MPa, psi or bar), the PT/G/NPT thread variant, and bracket inclusion are all selectable. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so there is no one l/min or SCFM number we can quote. Send us your application details and we will confirm the flow and sizing figures from the datasheet on request.
The M in the code specifies a manual drain: an operator opens the bowl drain to expel collected water instead of relying on an automatic or differential-pressure mechanism. It is the right choice where the unit is accessible and checked as part of a routine, while automatic or differential drains suit installations that run unattended.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.