The AirTAC GFR300C15MJF2WT AirTAC Filter Regulator NPT1/2 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR300C15MJF2WT is a 300-size filter regulator that removes water and particulate from compressed air and regulates downstream pressure in a single body. This configuration is fitted with a 5 um filter element for finer particle removal than the standard 40 um grade, a manual drain for the bowl, a square pressure gauge reading in psi, and a 1/2 in NPT port. The standard regulator covers an adjustment range of 0.05-0.9 MPa (7-130 psi) with this manual-drain version, and maximum inlet pressure is 1.0 MPa (145 psi). Operating temperature is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFR family is available in sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, a choice of differential-pressure, automatic or manual drain, 40 um or 5 um filtration, square or square/round gauge options with MPa, psi or bar scales, and PT, G or NPT threads. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application before ordering.
| Model | GFR300C15MJF2WT AirTAC Filter Regulator NPT1/2 |
|---|---|
| Series | GFR300 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · See datasheet · 40 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-C1 (two-unit set) |
Clean, regulated air for a bench or C-frame pneumatic press on a fabrication line, where the 5 um element protects the control valve and cylinder seals from fine particulate and the manual drain is checked at shift start.
Point-of-use filtration and regulation for cartoning or wrapping machinery, giving operators a local psi gauge to set working pressure per product changeover without walking back to the compressor room.
Supplying sorters, diverters and stop-gate actuators along a conveyor line, where stable regulated pressure keeps indexing consistent and the 1/2 in port serves multiple take-offs from one station.
Size and port set the capacity envelope: this 300-size unit has a 1/2 in NPT port, one step up from the 200 size, so step up further to the 400 or 600 series if your line may grow. Filtration here is the finer 5 um element (code W) instead of the 40 um standard - choose 5 um where downstream valves, cylinders or instruments are sensitive to fine particles. Drain is manual, so an operator drains the bowl periodically; choose automatic or differential-pressure drain if the unit is mounted in a hard-to-reach spot. The fitted square gauge reads in psi; MPa and bar scales and an external round gauge are alternatives. PT is the standard thread and G and NPT are order options - this unit is the NPT version. A mounting bracket is not included with this code (J suffix).
One honest note on sizing: AirTAC publishes flow for this family as curves, not as a single rated figure, so we do not quote a flow number here. Send us your application details and we will confirm the datasheet curve and sizing before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR family as curves, not as a single rated number, so we do not quote a flow figure here. Tell us your working pressure and air demand and we will confirm the datasheet curve and check the sizing for your application before you order.
The M in the code means the bowl is drained by hand, which suits stations that are easy to reach and checked as part of a routine. If the unit will be mounted high, inside a cabinet or anywhere infrequently visited, order the automatic (A) or differential-pressure (blank) drain version instead - both are catalogue options in the same size.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.