The AirTAC GFR300C15MJF2WTK AirTAC Filter Regulator NPT1/2 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR300C15MJF2WTK is a filter regulator: it removes water and particulate from compressed air and holds downstream pressure steady in one body. This 300-size unit is threaded NPT1/2, carries a 5 um filter element (the finer of the two catalogue grades), drains by hand through its manual drain, and is fitted with an embedded square pressure gauge reading in psi. A reverse-flow check valve is built in, the bowl is metal, and the unit is supplied without a mounting bracket.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 inch, and catalogue options include automatic, manual or differential-pressure drains, 40 um or 5 um filtration, G (BSPP) or NPT threads alongside the PT standard, gauge scales in MPa, psi or bar, and a reverse-flow valve. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so ask us to confirm figures from the datasheet for your application.
| Model | GFR300C15MJF2WTK AirTAC Filter Regulator NPT1/2 |
|---|---|
| Series | GFR300 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · See datasheet · 40 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-C1 (two-unit set) |
Conditioned air for tool changers, clamps and air-blast nozzles on a machining centre: the 5 um element screens fine particles from control valves and the manual drain lets operators clear collected water at shift start.
Steady regulated pressure for case-packing and sealing cylinders on a packaging conveyor, with the embedded psi gauge giving operators a direct reading at the machine without extra instrumentation.
Point-of-use conditioning on a lab or test-bench compressed-air ring main, where the 5 um grade suits instruments and pneumatic test rigs and the built-in check valve is fitted for reverse-flow protection.
Pick the size by the port and flow your line needs: this unit is size 300 with a 1/2 inch NPT thread, the largest port in the 300 series. The real choices on this family are drain type (manual here, versus automatic or the differential-pressure default), filter grade (5 um as fitted, or the standard 40 um), gauge scale (psi here; MPa or bar available), thread (PT is the standard; G and NPT are order options), bracket, and the reverse-flow check valve. Regulation range on this manual-drain unit is 0.05-0.9 MPa (7-130 psi).
Because AirTAC publishes flow only as curves rather than a single rated figure, send us your flow and pressure requirements and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR300 as curves rather than a single rated figure, so we do not quote one number. Send us your required flow and working pressure and we will confirm the figures from the datasheet before you order.
This unit drains by hand: someone opens the drain to expel collected water, which suits lines that are shut down regularly. If the unit runs unattended or in continuous production, the automatic drain (code A) or the differential-pressure drain (the default) removes that routine. All three are catalogue options across the GFR family.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.