The AirTAC GFR300C15MJF3TK AirTAC Filter Regulator NPT 1/2 in is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR300C15MJF3TK is an AirTAC GFR-series filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in a single body. This size 300 unit is threaded NPT 1/2 in and is configured with a 40 um filter element, a manual-drain polycarbonate bowl, an embedded square gauge scaled in bar, a built-in reverse (check) valve, and a standard regulator; it is supplied without a mounting bracket.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 in to 1 in, PT, G and NPT thread options, manual, automatic or differential-pressure drains, and 40 um or 5 um elements. Maximum inlet pressure is 1.0 MPa (145 psi) and working temperature is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so ask us to confirm figures from the datasheet for your application.
| Model | GFR300C15MJF3TK AirTAC Filter Regulator NPT 1/2 in |
|---|---|
| Series | GFR300 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · See datasheet · 40 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-C1 (two-unit set) |
Clean, regulated air at a set pressure to the cylinders and clamps on a packaging line, with the 1/2 in port feeding a main drop and the manual drain clearing collected condensate at shift end.
Pressure regulation for an air-operated press or clamping fixture, where the operator sets a repeatable downstream pressure on the square bar gauge and the check valve holds the setting during supply dips.
Filtered, regulated air to the diverters, stoppers and pushers along a conveyor line, protecting actuators from water and scale carried in the shop air supply.
Size and port step up together: sizes 200, 300, 400 and 600 cover ports from 1/8 in to 1 in, so choose the size whose flow curve meets your demand at working pressure - we can check the curve against your application on request. This code fixes several choices: manual drain (drain by hand; automatic and differential-pressure drains are available in the family), a 40 um element (5 um is the W option), a square gauge scaled in bar (MPa and psi scales are offered, and an external round gauge is optional), NPT thread (PT is the AirTAC standard; G is also orderable), and no mounting bracket (brackets are optional).
Regulation range with the manual drain is 0.05-0.9 MPa (7-130 psi), and the fitted reverse valve holds downstream pressure against supply loss. Because flow is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR300 as curves, not as a single rated figure, so we do not quote a number here. Tell us your working pressure and air consumption and we will confirm sizing from the datasheet against your application before you order.
The M in the code specifies a manual drain: you open it by hand to expel the water and contaminant collected in the bowl, which suits duties with regular operator attention. AirTAC offers automatic (code A) and differential-pressure (blank) drains in the same family if you prefer not to drain manually.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.