The AirTAC GFR300C15MLC2W AirTAC Filter Regulator PT1/2, 5 um is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR300C15MLC2W is an AirTAC GFR300 filter regulator: it removes water and particulate from compressed air and holds a set downstream pressure, in one body. This configuration is the size 300 unit with a PT1/2 (1/2 in) port, a 5 um filter element (code W), a manual drain, the low-pressure regulator type, a round psi gauge, a metal bowl and the included mounting bracket; no reverse/check valve is fitted.
It is a genuine AirTAC part. The GFR line spans sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, a choice of differential-pressure, automatic or manual drain, 40 um standard or 5 um filtration, gauge and thread options, and standard or low-pressure regulation. Max inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application.
| Model | GFR300C15MLC2W AirTAC Filter Regulator PT1/2, 5 um |
|---|---|
| Series | GFR300 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · See datasheet · 40 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-C1 (two-unit set) |
Supplying clean, regulated low-pressure air to a light-duty pneumatic press or clamping fixture on an assembly line, with the 5 um element helping protect downstream valves and cylinders from particulate and condensed water.
Regulated air supply for the cylinders that divert, stop and gate product on a packaging conveyor, with the manual drain bowl emptied by hand during scheduled line checks.
Pilot-air supply for pneumatically actuated process valves in a plant where the control circuit runs at reduced pressure, with the round psi gauge giving a local pressure readout at the unit.
Choose the size and port against the air your circuit needs: size 300 here carries a PT1/2 (1/2 in) port, and the larger sizes step up in port and flow capacity. This unit is already set for 5 um filtration (the standard element is 40 um) and a manual drain, which you open by hand rather than relying on an automatic or differential-pressure drain. The low-pressure regulator type is selected where the circuit works below the standard setting range; its exact range is not published, so confirm it with us. The round psi gauge is fitted; embedded square gauges with MPa, psi or bar scales are the catalogue alternative. Thread is PT as standard, with G (BSPP) and NPT available to order, and the bracket is included. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so we do not quote a number here. Send us your application details and we will confirm the datasheet flow curve and sizing for this PT1/2, size 300 unit before you order.
This unit's bowl has a manual drain: condensate is released by hand at service intervals. Choose manual where the machine is attended regularly; the catalogue also offers automatic and differential-pressure drains for unattended drops. The 5 um element (code W) is one step finer than the 40 um standard.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.