The AirTAC GFR400C15AJF2TK AirTAC Filter Regulator NPT1/2 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR400C15AJF2TK is an AirTAC GFR400 filter regulator: a 40 um filter and a pressure regulator combined in one body, size 400 with 1/2 in NPT ports. This configuration has an automatic drain that expels collected condensate without manual attention, a built-in square pressure gauge reading in psi, a reverse/check valve fitted, and no mounting bracket. Maximum inlet pressure is 1.0 MPa (145 psi), the regulator adjusts from 0.15 to 0.9 MPa (20-130 psi), and the operating temperature range is -5 to 70 C (non-freezing). The bowl on this 400 size is polycarbonate; only the 600 size uses an aluminium alloy bowl.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, and options include manual or differential-pressure drains, a 5 um filter element (code W), MPa or bar gauge scales, an external round gauge, G (BSPP) or NPT threads, and a mounting bracket. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application.
| Model | GFR400C15AJF2TK AirTAC Filter Regulator NPT1/2 |
|---|---|
| Series | GFR400 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR400 | G-series filter regulator, 400 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR400 · See datasheet · 40 µm |
|---|---|
| One size down | GFR300 |
| One size up | GFR600 |
| Add lubrication | GFC400-C1 (two-unit set) |
Feeding clean, regulated air to the pneumatic cylinders that drive filler and capper heads on a beverage bottling line, with the automatic drain handling condensate carried over from humid compressor air.
Regulating supply pressure to the air cylinders that raise, stop and divert product on a packaging conveyor, keeping actuator forces consistent across the shift.
Point-of-use conditioning at a maintenance workshop drop, filtering water and particulate from the shop air line and setting a stable pressure for impact wrenches and air ratchets.
Choose the size and port against the air demand of the circuit: this unit is size 400 with 1/2 in NPT ports, one step up in the 200/300/400/600 range where larger sizes carry larger ports and more flow. Drain type is a real choice: automatic (this unit) empties the bowl by itself, manual needs an operator, and the differential-pressure default drains on a pressure drop. The 40 um element is standard; specify 5 um (code W) for finer filtration. The embedded square gauge is set to psi here, with MPa or bar scales and an external round gauge available. PT is the standard thread, with G (BSPP) and NPT as order options; a bracket is optional and this unit omits one. Because flow is published as curves rather than a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR400 as curves rather than a single rated figure, so we do not quote one number. Send us your flow and pressure requirements and we will confirm the datasheet figures and check the sizing against your application before you order.
This unit carries the A drain code: the bowl expels collected condensate automatically, which suits unattended or hard-to-reach installations. Manual and differential-pressure drain variants are available in the same GFR400 series if a different arrangement suits your line better.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.