The AirTAC GFR400C15ALC1T AirTAC Filter Regulator NPT1/2 is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has See datasheet ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR400C15ALC1T is an AirTAC GFR400 filter regulator: it removes water and particulate from compressed air and holds downstream pressure at a set point, in a single body. This configuration is built for low-pressure circuits, sized at 1/2 in NPT thread, with an automatic drain that discharges collected condensate without manual attention, 40 um standard filtration, a round pressure gauge reading in MPa, and a mounting bracket included. Maximum working (inlet) pressure is 1.0 MPa (145 psi), with an operating temperature of -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFR series spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, and options including manual or differential-pressure drains, a 5 um filter element (code W), square or round gauges with MPa, psi or bar scales, and G (BSPP) or NPT threads in place of the PT standard. Flow is published as curves rather than a single rating, so ask us to confirm the datasheet figures for your application.
| Model | GFR400C15ALC1T AirTAC Filter Regulator NPT1/2 |
|---|---|
| Series | GFR400 filter regulator |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR400 | G-series filter regulator, 400 body — sets the port range. |
|---|---|
| C1 | Port size See datasheet. This body offers 10 = PT3/8", 15 = PT1/2". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR400 · See datasheet · 40 µm |
|---|---|
| One size down | GFR300 |
| One size up | GFR600 |
| Add lubrication | GFC400-C1 (two-unit set) |
On the low-pressure clamping circuit of a pneumatic press, this unit filters the supply air and holds the regulated pressure the clamp cylinders were set up for, while the automatic drain clears condensate between shifts without an operator opening the bowl.
Packaging machines with 1/2 in air drops use this filter regulator ahead of directional valves and cylinders, keeping water and swarf out of the valve seats while the round MPa gauge shows the set pressure at a glance.
In an automated assembly cell, this filter regulator feeds a valve manifold serving multiple actuators from a single 1/2 in drop, so every branch downstream sees filtered air at one stable, low-pressure set point.
Size and port set the flow path: this unit steps up to 1/2 in NPT, one size above GFR300, so choose GFR400 when your circuit needs the larger port. Drain type is decodable: automatic (this model, code A) versus manual (M) or the differential-pressure default. Filter grade is 40 um standard; specify W for the 5 um element. Gauges are square (embedded) or round (external) with MPa, psi or bar scales; thread is PT standard with G and NPT as order options; a bracket is included here. Flow is published as curves, not a single rated figure, so send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves rather than a single rated figure, so we do not quote a number here. Send us your application details and we will confirm the flow and the full datasheet figures for this model on request.
The A in GFR400C15ALC1T specifies the automatic drain, which discharges collected condensate without anyone opening the bowl - useful on lines that run unattended. The same GFR400 body is available with a manual drain (M) or the differential-pressure default, and with a 5 um element (W), other gauge scales, and G or NPT threads.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.