
The AirTAC 4V210-08 Solenoid Valve, 4V200 Series (4V21008B-W) is a genuine 5/2-way single solenoid (spring return) solenoid valve with PT1/4 ports and an effective area of 17.0 mm² (Cv 1.0). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The AirTAC 4V21008B-W is the external-pilot (-W) version of the 4V210-08B: a 5/2-way single-solenoid valve that sends compressed air to a double-acting cylinder or actuator and springs back to its rest position the moment the DC24V signal drops. Because pilot air is supplied through a separate external port rather than tapped internally from the main line, the spool still shifts reliably when main-line pressure is low or the circuit runs near vacuum - a situation that can starve an internally piloted valve.
This 4V200-size body flows through an effective area of 17 mm2 (Cv 1.0), which suits double-acting cylinders of roughly O32-50 mm bore. The DC24V coil draws just 3.0 W and wires into the terminal box; switching response is 0.05 s or faster, and the aluminium body carries IP65 protection. Total weight is a light 220 g, and a bank of these valves can be stacked on a common manifold base.
| Model | AirTAC 4V210-08 Solenoid Valve, 4V200 Series (4V21008B-W) |
|---|---|
| Series | 4V200 solenoid valve (spool type) |
| Valve type | 5/2-way |
| Function | Single solenoid (spring return) |
| Port size | PT1/4 |
| Exhaust port | PT1/8 |
| Effective area (Cv) | 17.0 mm² (Cv 1.0) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 5 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 220 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 17.0 mm² |
|---|---|
| Flow coefficient | Cv 1.0 |
| Response time | ≤ 0.05 s |
| Coil power | AC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 2 | Body size (4V200) — sets port & flow. |
| 1 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -08 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V210 (single), 4V220 (double), 4V230C/E/P (5/3 center). Add the voltage suffix when ordering.
External pilot feed keeps the 4V21008B-W switching dependably in vacuum-assist or reduced-pressure lines where an internally piloted valve would hesitate or fail to shift.
With Cv 1.0 flow and a sub-0.05 s response, this valve cycles O32-50 mm double-acting cylinders on pick-and-place and fastening heads, always returning home on spring when the signal is cut.
A 24 V PLC output drives the 3.0 W coil directly through the terminal box, making it a straightforward fit for packaging lines, clamping fixtures and product pushers.
Step down to the 4V100 (Cv 0.6) if your cylinder is smaller than about O32 mm or cycle speed is modest; step up to the 4V300 (Cv 1.65) for larger bores or faster stroke times. Within the 4V200 size, pick a single solenoid (10) when you need a defined rest position via spring return, a double solenoid (20) when a pulsed signal should hold position, or a 5/3 (30C/E/P) when the cylinder must hold, float or be pressurised at center. One valve per function or a shared manifold base both work - the base simplifies tubing and wiring on multi-valve machines. When replacing, match five points exactly: 4V200 body size, function (10/20/30x), port and thread (1/4in PT here), coil voltage (DC24V), electrical entry (terminal), plus this -W external-pilot option.
Quick checklist
It is a 5/2-way valve with an effective area of 17 mm2 (Cv 1.0), sized for double-acting cylinders and pneumatic actuators in roughly the O32-50 mm bore range. The single solenoid with spring return gives a defined rest position whenever the DC24V signal is removed.
The -W option feeds pilot air through a dedicated external port rather than tapping it from the main supply. That keeps shifting reliable on low-pressure or vacuum-side circuits where an internally piloted valve may not have enough differential to operate the spool. Everything else matches the 4V210-08B: 1/4in PT ports, DC24V 3.0 W coil, terminal entry, 220 g weight.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.