verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC 4V Series · 5/2-way Solenoid Valve

AirTAC 4V210-08 Solenoid Valve, 4V200 Series (4V21008BI-W)

The AirTAC 4V210-08 Solenoid Valve, 4V200 Series (4V21008BI-W) is a genuine 5/2-way single solenoid (spring return) solenoid valve with PT1/4 ports and an effective area of 17.0 mm² (Cv 1.0). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.

  • Valve type5/2-way
  • FunctionSingle solenoid (spring return)
  • Port sizePT1/4
  • Effective area17.0 mm²
  • Flow (Cv)1.0
  • Series4V200
$28.65 $33.05Save 13% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every 4V210-08 stroke, mounting and version on one page All 4V210-08 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the AirTAC 4V210-08 Solenoid Valve, 4V200 Series (4V21008BI-W)

The AirTAC 4V21008BI-W is the external-pilot (-W) version of the 4V200 mid-body 5/2 valve: a single solenoid with spring return that alternates pressure and exhaust between the two ports of a double-acting cylinder or actuator. Energise the coil to shift the spool; remove power and the internal spring returns it, so the valve needs a maintained electrical signal to hold a position. This SKU is wired for DC24V through a grommet entry with a 0.5 m pre-wired lead, drawing just 3.0 W, which keeps 24 V control panels cool and simplifies hookup.

The -W option feeds the pilot stage from a separate external pilot port rather than tapping it internally off the main supply. That means the spool still shifts cleanly when line pressure is low or when the valve sits in a vacuum or low-pressure circuit where an internal-pilot valve would fail to switch. Flow-wise it sits in the Cv 1.0 / 17 mm2 effective-area class of the 4V200, with a 5 cycle/sec maximum and response of 0.05 s or less, comfortably matching cylinders in the ~32-50 mm range. The complete unit weighs 220 g with PT (Rc) tapered 1/4 ports.

AirTAC 4V210-08 Solenoid Valve, 4V200 Series (4V21008BI-W) Technical Specifications

ModelAirTAC 4V210-08 Solenoid Valve, 4V200 Series (4V21008BI-W)
Series4V200 solenoid valve (spool type)
Valve type5/2-way
FunctionSingle solenoid (spring return)
Port sizePT1/4
Exhaust portPT1/8
Effective area (Cv)17.0 mm² (Cv 1.0)
FluidAir (filtered by 40µm element)
Pilot typeInternal / external pilot
Operating pressure0.15 – 0.8 MPa
Proof pressure1.2 MPa
Max frequency5 cycle/sec
Response time≤ 0.05 s (activating)
Temperature-20 to +70 °C
Body materialAluminum alloy
Weight220 g

Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.

Flow & Coil Options

Effective area17.0 mm²
Flow coefficientCv 1.0
Response time≤ 0.05 s
Coil powerAC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W
Protection / insulationIP65 (DIN40050), B-class
Voltage optionsDC24V, DC12V, AC110V, AC220V
Manual overrideYes (locking / non-locking)

Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.

Model Code: AirTAC 4V210-08 Solenoid Valve, 4V200 Series (4V21008BI-W)

4VSolenoid valve, spool type, 4-series.
2Body size (4V200) — sets port & flow.
1Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3.
-08Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2".

Related: 4V210 (single), 4V220 (double), 4V230C/E/P (5/3 center). Add the voltage suffix when ordering.

Where the AirTAC 4V210-08 Solenoid Valve, 4V200 Series (4V21008BI-W) Is Used

valve

Low-pressure and vacuum circuits

External pilot feed keeps the spool switching dependably where main-line pressure is reduced or below atmospheric, so the valve also works in vacuum handling and low-pressure process lines.

precision_manufacturing

Return-on-signal-loss tooling

Spring return suits clamp-and-return motions on fixtures and jigs for ~32-50 mm bores: cutting power at any moment sends the cylinder home on the 0.15-0.8 MPa working range.

cable

24 V PLC stations with pre-wired coils

The grommet entry gives a 0.5 m flying lead straight to a PLC or relay terminal block, and the 3.0 W DC24V coil switches safely from low-power transistor outputs.

Is the AirTAC 4V210-08 Solenoid Valve, 4V200 Series (4V21008BI-W) the Right Valve?

Size by bore and speed: the 4V200 at Cv 1.0 suits ~32-50 mm double-acting cylinders; step down to the 4V100 (Cv 0.6) for small compact cylinders, or up to the 4V300 (Cv 1.65) for larger bores or faster cycling. A single 5/2 with spring return (this valve) is the default for return-by-spring circuits where the cylinder must go home on signal loss; a double-solenoid 5/2 (4V220) holds its last position without current, and a 5/3 (4V230C/E/P) adds a defined center condition. Mount on an individual base or build an integrated manifold group to serve several stations from one supply.

Ordering a replacement? Match five points: body size (4V200), function (single 5/2 spring return), port and thread (1/4 PT here), coil voltage (DC24V), electrical entry (grommet). Add the -W suffix if your circuit relies on an external pilot feed - an internal-pilot valve will not switch correctly in vacuum or low-pressure service.

Quick checklist

  • ✓ Required flow (Cv) for cylinder & speed
  • ✓ Function: single / double / 5-3 center
  • ✓ Coil voltage (DC24 / AC220 …)
  • ✓ Port thread (M5 / 1/8 / 1/4 / 3/8 / 1/2)
  • ✓ Single valve or manifold base?
Ask an Engineer

Installation & Wiring Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 0.8 MPa operating pressure.
  • check Match coil voltage to your controller output.
  • check Use the manual override to test before powering.
  • check Fit silencers or fittings to the exhaust ports.
  • check Wiring by qualified personnel per AirTAC docs.

AirTAC 4V210-08 Solenoid Valve, 4V200 Series (4V21008BI-W) FAQ

It is a 5/2 single-solenoid valve rated at Cv 1.0 (17 mm2 effective area), intended for double-acting cylinders and actuators around ~32-50 mm bore. The -W suffix means pilot air is supplied through a separate external pilot port instead of being taken internally from the main line, so the valve shifts reliably even in vacuum or low-pressure circuits where an internal-pilot version cannot switch.

The coil runs on 24 V DC at 3.0 W and exits through a grommet with a 0.5 m pre-wired lead, protected to IP65. While energised, the spool feeds one cylinder side and exhausts the other; when you remove the signal, the spring returns the valve, so a constant 24 V signal is required to hold the extended position.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Request a Quote for AirTAC 4V210-08 Solenoid Valve, 4V200 Series (4V21008BI-W)

Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for 4V21008BI-W and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.