
The AirTAC 4V230E-06BI Solenoid Valve, 5/3-way, exhaust center, PT1/8, DC24V, grommet entry (4V230E06BI) is a genuine 5/3-way 5/3 double solenoid — exhaust center solenoid valve with PT1/8 ports and an effective area of 13.6 mm² (Cv 0.8). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The 4V230E-06BI is a 5/3-way double-solenoid pneumatic directional valve that directs compressed air to double-acting cylinders and rotary actuators. With its exhaust center configuration, both cylinder ports are connected to exhaust when the valve returns to its neutral position, allowing the actuator to float freely—ideal for applications where the load must be manually repositioned or where no holding force is required at mid-stroke.
This model comes pre-wired with a 0.5 m flying lead via a grommet entry and operates on a 3.0 W DC24V coil. It belongs to the 4V200 body class, offering an effective area of 13.6 mm² (Cv 0.8, catalog figure for the 4V230C-08) and a maximum cycling speed of 3 cycles per second. The aluminum-alloy body weighs 360 g, and the spool responds in 0.05 seconds or less, ensuring crisp, reliable shifting for cylinders in the ~Ø32-50 mm range.
| Model | AirTAC 4V230E-06BI Solenoid Valve, 5/3-way, exhaust center, PT1/8, DC24V, grommet entry (4V230E06BI) |
|---|---|
| Series | 4V200 solenoid valve (spool type) |
| Valve type | 5/3-way |
| Function | 5/3 double solenoid — Exhaust center |
| Port size | PT1/8 |
| Exhaust port | PT1/8 |
| Effective area (Cv) | 13.6 mm² (Cv 0.8) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 3 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 360 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 13.6 mm² |
|---|---|
| Flow coefficient | Cv 0.8 |
| Response time | ≤ 0.05 s |
| Coil power | AC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 2 | Body size (4V200) — sets port & flow. |
| 3 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -06 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V210 (single), 4V220 (double), 4V230C/E/P (5/3 center). Add the voltage suffix when ordering.
The exhaust center spool vents both cylinder ports at neutral, letting operators freely slide or reposition a tooling plate without fighting trapped air pressure.
Controls a double-acting cylinder on a package diverter. The float condition at center prevents a stalled load from being locked under pressure, simplifying jam clearance.
Drives a clamp cylinder that must fully release pressure when retracted. The exhaust center ensures no residual force remains on the workpiece during the unload cycle.
Choose this 5/3 exhaust-center valve when your application requires the cylinder to be completely depressurized at rest, such as for manual setup adjustments or when a load must be free of back-pressure. If you need the cylinder to hold position at center, step up to the closed-center 4V230C variant; for a balanced pressure hold, select the pressure-center 4V230P. The 4V200 body size hits a sweet spot for mid-range cylinders—if you are driving smaller Ø16-25 mm bores, the compact 4V100 series (Cv 0.6) may be a better fit, while larger Ø63 mm or faster-cycle actuators often benefit from the higher flow of a 4V300 (Cv 1.65).
When replacing an existing valve, match these five points: confirm the 4V200 body size, the 5/3 exhaust-center function, the 1/8 inch PT port thread, a DC24V coil, and the grommet-style electrical entry. This valve can be mounted individually or ganged on a common manifold base for a clean, multi-valve assembly.
AirtacDistr lists every 4V230E-06 order code with its price on one page at https://airtacdistr.com/products/airtac-4v230e-06-solenoid-valve
Quick checklist
In the center (neutral) position, both the A and B cylinder ports are connected to the exhaust port. This depressurizes both sides of a double-acting cylinder, allowing the piston rod to be moved freely by an external force—unlike a closed-center valve which would trap air and hold the load in place.
With an effective area of 13.6 mm² (Cv 0.8, catalog figure for the 4V230C-08), this 4V200-series valve is well-matched to double-acting cylinders in the ~Ø32-50 mm bore range. It provides a good balance of flow and compact size for general automation tasks. For very small Ø16-20 mm cylinders, a 4V100 valve may offer more precise control.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.