
The AirTAC 4V230P-06B Solenoid Valve, 5/3-way, pressure center, PT1/8, DC24V, terminal entry (4V230P06B) is a genuine 5/3-way 5/3 double solenoid — pressure center solenoid valve with PT1/8 ports and an effective area of 13.6 mm² (Cv 0.8). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The AirTAC 4V230P-06B is a 5/3-way double-solenoid valve with a pressure center, designed to direct compressed air to double-acting cylinders and actuators. In its center position, both cylinder ports A and B are simultaneously pressurized, which can be used to hold a cylinder rod against a balanced force or to counteract gravity in a vertical axis during a controlled stop. This model is configured with a DC24V coil drawing just 3.0 W and a standard terminal box entry on a PT-threaded 1/8-inch body.
Built on the proven 4V200 aluminum-alloy platform, this valve delivers an effective area of 13.6 mm2 (Cv 0.8, catalog figure for the 4V230C-08) and a maximum operating frequency of 3 cycles per second. It suits double-acting cylinders in the O32-50 mm bore range and includes a locking manual override for setup. The sliding-spool design responds in 0.05 seconds or less and is rated IP65 for reliable service in dusty or washdown environments.
| Model | AirTAC 4V230P-06B Solenoid Valve, 5/3-way, pressure center, PT1/8, DC24V, terminal entry (4V230P06B) |
|---|---|
| Series | 4V200 solenoid valve (spool type) |
| Valve type | 5/3-way |
| Function | 5/3 double solenoid — Pressure center |
| Port size | PT1/8 |
| Exhaust port | PT1/8 |
| Effective area (Cv) | 13.6 mm² (Cv 0.8) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 3 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 360 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 13.6 mm² |
|---|---|
| Flow coefficient | Cv 0.8 |
| Response time | ≤ 0.05 s |
| Coil power | AC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 2 | Body size (4V200) — sets port & flow. |
| 3 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -06 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V210 (single), 4V220 (double), 4V230C/E/P (5/3 center). Add the voltage suffix when ordering.
The pressure-center spool pressurizes both sides of a double-acting cylinder at center, helping to balance a vertical load during a controlled stop without a full mechanical brake.
Ideal for clamping fixtures where you need to apply a balanced holding force from both directions before the final work stroke, ensuring the part is centered.
Used in end-of-arm tooling on palletizers where a 5/3 pressure-center valve prevents the gripper from sagging or dropping when the machine pauses between cycles.
Choose the 4V230P-06B when your application needs a 5/3 pressure-center function in a compact 1/8-inch port body. The pressure-center spool applies supply pressure to both cylinder ports at rest, making it useful for opposing-force applications or where a controlled, non-floating stop is required. If your cylinder is smaller (O20-25 mm), the 4V100 series (Cv 0.6) may be more economical; for larger bores or faster cycle times, step up to the 4V300 series (Cv 1.65).
This valve is a single unit, but the 4V200 series can be mounted on a manifold base to create a multi-valve station. When replacing an existing valve, match all five points: body size (4V200), function (5/3 pressure-center), port size and thread (1/8-inch PT), coil voltage (DC24V), and electrical entry (terminal box). A grommet-entry version is also available if you prefer a pre-wired flying lead.
Quick checklist
Unlike a closed-center (all ports blocked) or exhaust-center (cylinder floats), a pressure-center valve applies supply pressure to both cylinder ports A and B when the spool is at center. This creates a balanced force that can hold a cylinder against a load or center it, but it is not a safety lock; a separate mechanical brake is needed for suspended loads.
Yes, the 'B' suffix in the model code specifies a DC24V coil, which consumes 3.0 W of power. The terminal box entry lets you wire it directly to your 24 VDC control circuit. Ensure your power supply is stable and filtered, and always use a 40-micron air filter upstream of the valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.