
The AirTAC 4V230P-08C Solenoid Valve, 5/3-way, pressure center, PT1/4, AC110V, terminal entry (4V230P08C) is a genuine 5/3-way 5/3 double solenoid — closed center solenoid valve with PT1/4 ports and an effective area of 13.6 mm² (Cv 0.8). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The AirTAC 4V230P-08C is a 5/3-way double-solenoid valve that directs compressed air to double-acting cylinders and actuators with a distinct pressure-center function. When both solenoids are de-energized, the spool moves to its center position and applies pressure to both cylinder ports (A and B) simultaneously, which is useful for holding a load against a fixed stop or for specific clamping sequences where equal force is needed on both sides.
This 4V200-body valve provides an effective area of 13.6 mm² (Cv 0.8, catalog figure for the 4V230C-08) and a maximum cycling rate of 3 cycles per second, suiting it for mid-range cylinders roughly Ø32–50 mm. The 4V230P-08C is factory-configured with an AC110V coil drawing 4.5 VA, a terminal-box electrical entry, and PT (Rc) tapered threads on its 1/4-inch ports. Like every 4V200 series valve, it features a sub-0.05-second response time and IP65-rated protection.
| Model | AirTAC 4V230P-08C Solenoid Valve, 5/3-way, pressure center, PT1/4, AC110V, terminal entry (4V230P08C) |
|---|---|
| Series | 4V200 solenoid valve (spool type) |
| Valve type | 5/3-way |
| Function | 5/3 double solenoid — Closed center |
| Port size | PT1/4 |
| Exhaust port | PT1/8 |
| Effective area (Cv) | 13.6 mm² (Cv 0.8) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 3 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 360 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 13.6 mm² |
|---|---|
| Flow coefficient | Cv 0.8 |
| Response time | ≤ 0.05 s |
| Coil power | AC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 2 | Body size (4V200) — sets port & flow. |
| 3 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -08 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V210 (single), 4V220 (double), 4V230C/E/P (5/3 center). Add the voltage suffix when ordering.
The pressure-center function applies air to both sides of a cylinder at center, making it ideal for clamping fixtures where you need balanced, non-drifting force on a part before a secondary operation begins.
With a 3 cycles/sec response and Cv 0.8 (catalog figure for the 4V230C-08) flow, this valve reliably cycles diverter gates on packaging and assembly conveyors, handling cylinders in the Ø40–50 mm range.
Used in light pneumatic presses, the pressure-center spool keeps the tooling under balanced pressure at idle, preventing unexpected drift and ensuring repeatable start positions for each cycle.
Choose the 4V230P-08C when your application needs a 5/3 center condition that pressurizes both sides of the actuator at rest. This is a different behavior from the closed-center (30C) which blocks all air, or the exhaust-center (30E) which vents both ports. If your cylinder is smaller than Ø32 mm, the 4V100 series (Cv 0.6) may be a better match; for larger bores or faster strokes beyond Ø50 mm, step up to the 4V300 body (Cv 1.65).
For direct replacement, match these five points: 4V200 body size, 5/3 pressure-center function (30P), 1/4-inch ports (08), AC110V coil voltage (C), and terminal-box entry. The valve can be used individually or mounted on a 200-series manifold base for multi-valve assemblies.
Quick checklist
In the de-energized center position, the spool connects the supply port to both cylinder ports (A and B), pressurizing both sides of the actuator. This differs from closed-center (ports blocked) or exhaust-center (ports vented). It is typically used to hold a cylinder against a stop with balanced force.
No, the 4V230P-08C is built with an AC110V (50/60 Hz) solenoid coil rated at 4.5 VA. Using it on a DC supply will burn the coil instantly. If your control system uses DC24V, select the 4V230P-08B variant instead, which has a 3.0 W DC coil.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.