
The AirTAC 4V330E-10C Solenoid Valve, 5/3-way, exhaust center, PT3/8, AC110V, terminal entry (4V330E10C) is a genuine 5/3-way 5/3 double solenoid — closed center solenoid valve with PT3/8 ports and an effective area of 21.3 mm² (Cv 1.25). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The AirTAC 4V330E-10C is a 5/3-way double-solenoid pneumatic directional valve built on the 4V300 aluminum body platform. In its center (de-energized) position, both cylinder ports A and B are connected to exhaust while the inlet is blocked, allowing a double-acting cylinder to float freely—ideal for applications where the load must be moved manually or the actuator needs to be unloaded at rest. This terminal-box model operates on an AC110V coil drawing 4.5 VA.
With an effective area of 21.3 mm² (Cv 1.25, catalog figure for the 4V330C-10) and a maximum cycling speed of 3 cycles per second, this 3/8-inch ported valve suits pneumatic systems driving medium-bore cylinders in the O50 to 80 mm range. The sliding-spool design responds in 0.05 seconds or less and requires no lubrication, maintaining IP65 protection for reliable service in demanding industrial environments.
| Model | AirTAC 4V330E-10C Solenoid Valve, 5/3-way, exhaust center, PT3/8, AC110V, terminal entry (4V330E10C) |
|---|---|
| Series | 4V300 solenoid valve (spool type) |
| Valve type | 5/3-way |
| Function | 5/3 double solenoid — Closed center |
| Port size | PT3/8 |
| Exhaust port | PT1/4 |
| Effective area (Cv) | 21.3 mm² (Cv 1.25) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 3 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 450 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 21.3 mm² |
|---|---|
| Flow coefficient | Cv 1.25 |
| Response time | ≤ 0.05 s |
| Coil power | AC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 3 | Body size (4V300) — sets port & flow. |
| 3 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -10 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V310 (single), 4V320 (double), 4V330C/E/P (5/3 center). Add the voltage suffix when ordering.
The exhaust center allows a clamped or lifted load to be manually repositioned when the valve is at rest, as both sides of the cylinder vent to atmosphere. Common on assembly benches and ergonomic lift-assist devices.
Controls a double-acting stop gate on a conveyor line. At center, the gate cylinder floats so product can push it aside without back-pressure, preventing jams and reducing actuator wear.
Used in small pneumatic presses where the ram must retract freely after a cycle. The 4V330E-10C dumps cylinder pressure at center, letting the tooling return by gravity or an external force.
Choose the 4V330E-10C when your double-acting cylinder circuit needs to release all trapped air at the mid-stroke rest position, preventing any residual pressure from resisting manual setup or load changes. This 4V300-series valve provides the flow capacity (Cv 1.25) for 50-80 mm bore actuators; step down to a 4V200 (Cv 1.0) for smaller cylinders under 40 mm, or move up to the 4V400 (Cv 2.82) for bores above 100 mm. For a manifold assembly, confirm the sub-base matches the 4V300 footprint and your 3/8-inch PT porting.
When replacing an existing 5/3 exhaust-center valve, match five points: the 4V300 body size, the 30E function code, the 3/8-inch PT thread, the AC110V coil voltage, and the standard terminal-box electrical entry. If your cylinder must hold position at center rather than float, select the closed-center 4V330C variant instead.
Quick checklist
With a Cv of 1.25 and a 21.3 mm² effective area, this 4V300-series 5/3 valve is well-matched to double-acting cylinders with bores roughly between 50 and 80 mm. It provides sufficient flow for crisp actuation without oversizing the valve for the application.
When neither solenoid is powered, the spring-centered spool blocks the pressure inlet and connects both cylinder ports (A and B) directly to the exhaust ports. This vents all air from the cylinder, allowing the piston rod to be moved freely by an external force—a 'float' condition. It does not lock the load in place.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.