This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE100X160B, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.

The AirTAC ACP Compact Cylinder ACP100X160B is a double acting DIN-standard tight/compact air cylinder with a Ø100mm bore and 160mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE100X160B (ISO 21287 ACE), in the same bore, stroke and force class.
The ACP100X160B is a double acting compact cylinder with a 100 mm bore and 160 mm stroke, built to the DIN-standard short-body format with a hard-anodized aluminium body and an S45C hard-chrome plated 25 mm rod. Air drives the piston in both directions, and fixed TPU bumpers at each end decelerate the piston at the extremes. At 0.5 MPa it pushes with 3927 N and pulls with 3681.6 N; at 0.7 MPa push rises to 5497.8 N, with a theoretical maximum of 800.9 kgf at 1.0 MPa. The male rod thread (the B code) suits rod knuckles and workpiece brackets that bolt straight onto the ISO 21287 face.
This is the largest bore in the family, and it earns its keep in tight machines: the short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so a 3927 N-class push fits where a full-length body will not. Note that this unit is discontinued: the current-production direct is the ACE100X160, so confirm the ISO 21287 mounting dimensions before swapping. The optional -S magnet enables CMSE / DMSE switches; without the -S code no magnet is fitted.
| Model | Airtac ACP Compact Cylinder ACP100X160B |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE100X160B |
| Bore size | Ø100 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE100X160B (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | 5154 N |
| Max (@1.0 MPa) | 801 kgf | |
The ACE100X160B produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
A 3927 N push at 0.5 MPa slides 200-300 kg steel coils off a pallet station; the 160 mm stroke clears the transfer lane, and the short body fits inside the guard frame where a full-length body cannot.
The 100 mm bore clamps stacked cartons against a strapping head; about 2356 N of usable force at 0.5 MPa holds the stack square, and the male rod thread takes a knuckle for a pivoting clamp pad.
At 100 mm bore this is the top of the range: 3927 N push at 0.5 MPa. If your load needs under 2513 N, the 80 mm bore gives that figure; if you need more than 3927 N at the same pressure, no larger ACP bore exists, so add pressure or leverage. Stroke 160 mm sits well inside the 300 mm maximum standard stroke for this bore, so it is a standard build. Remember a plain ACP drifts when air is lost - for a held load add a rod lock or pilot check valve. Mounting: FA/FB flange, LB foot, CA/CB clevis, CR, SDB pivot and FTC brackets plus I/Y rod knuckles match the ISO 21287 face, and the male rod thread (B) takes knuckles directly. Order the -S code if you want CMSE / DMSE switch positions. Replacement: ACE100X160, current production - verify ISO 21287 mounting dimensions before the swap.
Replacement checklist
At 0.5 MPa it pushes 3927 N and pulls 3681.6 N; at 0.7 MPa push is 5497.8 N and pull 5154.2 N; theoretical maximum is 800.9 kgf at 1.0 MPa. It is double acting, running on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C. Port is 1/4" (PT), rod 25 mm with male thread, and the 160 mm stroke is standard (max standard 300 mm for this bore).
Yes, the ACP family is out of production; the current direct is the ACE100X160, same 100 mm bore, 160 mm stroke and force class in the ISO 21287 short body - confirm the mounting dimensions before swapping, since the ACP was built to a DIN standard. For sensing on either unit, the magnet is the optional -S code: order ACP100X160BS (or the ACE equivalent) and CMSE / DMSE reed or solid-state switches can be clipped on. Without -S there is no magnet in the piston.
Send us the quantity and destination. We confirm price, stock and lead time on the ACE100X160B replacement — usually within 7-8 hours.